Bedrock 1200 Power tube wiring.

Completed amps from Fender, Orange, Hiwatt, Vox, etc.

Moderator: VelvetGeorge

Post Reply
Gunn E. Slinger
New Member
Posts: 40
Joined: Tue May 29, 2007 9:37 pm
Location: San D Eggo

Bedrock 1200 Power tube wiring.

Post by Gunn E. Slinger » Thu Aug 04, 2016 12:54 am

I have a Bedrock 1200, (Loosely based on a jtm45), 2 el34 power section, now, there is a 1ohm resistor on one socket tied to pin 7 and 8 with a jumper 8-1 and ground,
On the other tube same arrangement but the resister is between 2 and 1, than jumped to 8 and ground, looks like one of the sockets has been replaced at one point so, I was wondering what was going on there with the resistor coming off the heaters.

Post Reply