Hi,
I just wanted to share a few videos of my amateur attempt to install the Metro Zero Loss effects loop into my Chupacabra. I have to find a way to retrofit it into the chassis since the chassis holes are only 1" apart. Other than that, I think it sounds great.
https://youtu.be/Ew8cqOkVeLE
https://youtu.be/oNYvSF5qPjQ
https://youtu.be/3OI3LTxPqoo
Zero loss fx loop installation - Ceriatone Chupacabra
Moderator: VelvetGeorge
-
- Senior Member
- Posts: 204
- Joined: Fri Jan 15, 2010 10:51 pm
- Just the numbers in order: 7
- neikeel
- Senior Member
- Posts: 7231
- Joined: Tue Dec 06, 2005 8:31 am
- Location: Suffolk, England
Re: Zero loss fx loop installation - Ceriatone Chupacabra
Glad you got it working.
Just looks like if you put the right hole of loop in the pussy trimmer and the left jack next to it and see if pussy trimmer will move to the far left hole (i.e. between output jacks and loop?).
Just looks like if you put the right hole of loop in the pussy trimmer and the left jack next to it and see if pussy trimmer will move to the far left hole (i.e. between output jacks and loop?).
Neil
-
- Senior Member
- Posts: 204
- Joined: Fri Jan 15, 2010 10:51 pm
- Just the numbers in order: 7
Re: Zero loss fx loop installation - Ceriatone Chupacabra
I used one of the speaker jack holes and removed one of the jacks from the metro board to put in the hole for the send jack. Now I have to plug up the old return jack hole.