Just purchased a duet of 6L6GC from Mesa, I can see some brown like glue substance where the base and the glass meet.
Is this OK? Should I just chalk it up to cheap tubes?
Jerry
Sloppy tube assembly?
Moderator: VelvetGeorge
-
- Senior Member
- Posts: 231
- Joined: Wed Feb 18, 2009 7:18 am
- Just the numbers in order: 7
- AustinTx
- Senior Member
- Posts: 254
- Joined: Sun Feb 15, 2009 5:20 pm
- Just the numbers in order: 7
- Location: Austin, Texas
- Contact:
Re: Sloppy tube assembly?
That is a good thing!
Not enough glue lets the glass come loose and rattle...adding glue is not easy...you have to bake it in an oven.
Not enough glue lets the glass come loose and rattle...adding glue is not easy...you have to bake it in an oven.
Austin Texas
http://www.doug-morrison.com" onclick="window.open(this.href);return false;
http://www.doug-morrison.com" onclick="window.open(this.href);return false;
-
- Senior Member
- Posts: 231
- Joined: Wed Feb 18, 2009 7:18 am
- Just the numbers in order: 7
Re: Sloppy tube assembly?
Good news, thank you.