Willing to draw up Marshall 4x12 blueprints

This is what it sounds like, when cones cry.

Moderators: VelvetGeorge, BUG

Wattever
Senior Member
Posts: 140
Joined: Fri Mar 04, 2011 6:56 pm
Just the numbers in order: 7

Re: Willing to draw up Marshall 4x12 blueprints

Post by Wattever » Wed Jun 15, 2011 7:53 am

From what I saw, he normally uses veneered particle board for cabinets these days, but he had the BB ply there in about 2 days.

PM sent with prices.

6STRINGNOOB
New Member
Posts: 5
Joined: Fri Jun 24, 2011 1:50 am
Just the numbers in order: 7

Re: Willing to draw up Marshall 4x12 blueprints

Post by 6STRINGNOOB » Fri Jun 24, 2011 2:26 am

Cool thread. Anyways, 5/8 Baltic birch or Russian birch is expensive. I can get it for about 55 per 5x5 sheet. It's high quality, uses better glue and has few or no voids within the sheet-not like your big box store plywood. 5/8 should give excellent tone and be much lighter than 3/4/. The best way to attach side to top and bottom would be either box or dovetail joints using a jig. Something similar to a Keller jig with a router. I would not suggest using drywall screws. Instead go to McFeelys and get some cabinet screws and some trim washers for attaching the backs and then to Reliable hardware company for the handles, jacks and what not. Titebond should be all you need for glue. If you have a tablesaw, great! Get a helper to grab the wood as it comes off the back of the saw-safety first. If not, you could do it with a circular saw,straightedge and a couple saw horses. to make the speaker holes, use a plunge router with a circle cutting jig. If your good at it, you could probably make some money at it.

the jaywalker
New Member
Posts: 7
Joined: Fri Jun 10, 2011 4:21 pm
Just the numbers in order: 7

Re: Willing to draw up Marshall 4x12 blueprints

Post by the jaywalker » Sat Mar 17, 2012 3:12 pm

drat! curses! megaupload has been seized by the FBI brain policia.

frenchie
Senior Member
Posts: 1502
Joined: Fri Oct 26, 2007 7:50 am
Location: france

Re: Willing to draw up Marshall 4x12 blueprints

Post by frenchie » Fri Apr 13, 2012 10:44 pm

Tazin wrote:Ok, now that phase one is somewhat complete here's the revised blueprint. Once again, corrections and suggestions are always welcome.

http://www.megaupload.com/?d=4U2XBHTD" onclick="window.open(this.href);return false;
it's time to repost them i think :scratch: , someone still have them ? lost my copy in the crash of my computer last christmas :palm:

Mr_Pink
New Member
Posts: 47
Joined: Fri Jan 27, 2006 3:28 am
Location: VA

Re: Willing to draw up Marshall 4x12 blueprints

Post by Mr_Pink » Sat Apr 14, 2012 8:06 am

Yes....Please someone re post.

Tazin
Senior Member
Posts: 745
Joined: Fri Jan 19, 2007 8:54 pm

Re: Willing to draw up Marshall 4x12 blueprints

Post by Tazin » Sat Apr 14, 2012 2:37 pm

Ok, I'll see what I can do.

Tazin
Senior Member
Posts: 745
Joined: Fri Jan 19, 2007 8:54 pm

Re: Willing to draw up Marshall 4x12 blueprints

Post by Tazin » Sat Apr 14, 2012 3:54 pm

Hopefully this works. https://rapidshare.com/files/1434496960 ... tr_Cab.pdf" onclick="window.open(this.href);return false;

One of these days I'll get off my ass and post the matching slant cab 1960a blueprints too.

frenchie
Senior Member
Posts: 1502
Joined: Fri Oct 26, 2007 7:50 am
Location: france

Re: Willing to draw up Marshall 4x12 blueprints

Post by frenchie » Sat Apr 14, 2012 4:32 pm

Tazin wrote:Hopefully this works. https://rapidshare.com/files/1434496960 ... tr_Cab.pdf" onclick="window.open(this.href);return false;

One of these days I'll get off my ass and post the matching slant cab 1960a blueprints too.
super nice of you man ! but ... rapidshare don't work with me ... imageschack would be far better i think ( plus it's free :wink: )

Tazin
Senior Member
Posts: 745
Joined: Fri Jan 19, 2007 8:54 pm

Re: Willing to draw up Marshall 4x12 blueprints

Post by Tazin » Sat Apr 14, 2012 4:59 pm

frenchie wrote:
Tazin wrote:Hopefully this works. https://rapidshare.com/files/1434496960 ... tr_Cab.pdf" onclick="window.open(this.href);return false;

One of these days I'll get off my ass and post the matching slant cab 1960a blueprints too.
super nice of you man ! but ... rapidshare don't work with me ... imageschack would be far better i think ( plus it's free :wink: )
As in the link is no good, or is your country blocking the use of rapidshare? PM me with your e-mail addr and I'll send you the file. In addition, I'll look into imageshack also.

frenchie
Senior Member
Posts: 1502
Joined: Fri Oct 26, 2007 7:50 am
Location: france

Re: Willing to draw up Marshall 4x12 blueprints

Post by frenchie » Sat Apr 14, 2012 5:03 pm

Tazin wrote:
frenchie wrote:
Tazin wrote:Hopefully this works. https://rapidshare.com/files/1434496960 ... tr_Cab.pdf" onclick="window.open(this.href);return false;

One of these days I'll get off my ass and post the matching slant cab 1960a blueprints too.
super nice of you man ! but ... rapidshare don't work with me ... imageschack would be far better i think ( plus it's free :wink: )
As in the link is no good, or is your country blocking the use of rapidshare? PM me with your e-mail addr and I'll send you the file. In addition, I'll look into imageshack also.
i think my country is possibly blocking the link yeah :?

frenchie
Senior Member
Posts: 1502
Joined: Fri Oct 26, 2007 7:50 am
Location: france

Re: Willing to draw up Marshall 4x12 blueprints

Post by frenchie » Sat Apr 14, 2012 5:28 pm

okay , here it is accessible for everybody :wink: ;

http://pdfcast.org/pdf/4x12-straight-plans" onclick="window.open(this.href);return false;

thanks tazin :mrgreen:

Mr_Pink
New Member
Posts: 47
Joined: Fri Jan 27, 2006 3:28 am
Location: VA

Re: Willing to draw up Marshall 4x12 blueprints

Post by Mr_Pink » Tue Apr 17, 2012 2:50 am

Rapidshare link worked fine for me...Thanks!!!

Mr_Pink
New Member
Posts: 47
Joined: Fri Jan 27, 2006 3:28 am
Location: VA

Re: Willing to draw up Marshall 4x12 blueprints

Post by Mr_Pink » Wed Apr 25, 2012 10:01 pm

:D :D This is an awesome set of plans....Thanks for doing this is really makes things easy. Now I just need to work out the corner joints. I assume you would build a jig for that? I am new to woodworking, but making progress, and picking up the right tools as I go. :D :D

ntrueman
New Member
Posts: 2
Joined: Sun Jun 10, 2018 11:32 am
Just the numbers in order: 13492

Re: Willing to draw up Marshall 4x12 blueprints

Post by ntrueman » Tue May 26, 2020 5:12 pm

Any chance of reposting the plans as none of the links work now. Many thanks.

Post Reply