JTM 45 kit instructions
Moderator: VelvetGeorge
- VelvetGeorge
- Site Owner
- Posts: 7233
- Joined: Tue Oct 14, 2003 5:12 pm
- Just the numbers in order: 13492
- Location: The Murder Mitten
- Contact:
JTM 45 kit instructions
I thought a catagory for these new kits would make it easier to find info on them.
And it gives me a place to upload the instruction pages.
Here's the board wiring diagram I've made. Please let me know if it seems intuitive.
George
And it gives me a place to upload the instruction pages.
Here's the board wiring diagram I've made. Please let me know if it seems intuitive.
George
- Attachments
-
- board wiring diagram copy 2.jpg (66.48 KiB) Viewed 2826 times
Last edited by VelvetGeorge on Wed Jul 27, 2005 1:57 pm, edited 1 time in total.
- Flames1950
- Senior Member
- Posts: 9294
- Joined: Sun Feb 08, 2004 1:04 am
- Location: Waukee, Iowa
- 5150loveeddie
- Senior Member
- Posts: 3340
- Joined: Mon Apr 12, 2004 8:52 pm
- Just the numbers in order: 13492
- Location: Montreal, Quebec CANADA
make sure you identify the pins (number...) from the sockets!!
Glutathione increase specialist
http://www.max.com/science/448523/full/ ... lutathione" onclick="window.open(this.href);return false;
http://www.max.com/science/448523/full/ ... lutathione" onclick="window.open(this.href);return false;
- VelvetGeorge
- Site Owner
- Posts: 7233
- Joined: Tue Oct 14, 2003 5:12 pm
- Just the numbers in order: 13492
- Location: The Murder Mitten
- Contact:
Re: JTM 45 kit instructions
It's not showing up for me.VelvetGeorge wrote:I thought a catagory for these new kits would make it easier to find info on them.
And it gives me a place to upload the instruction pages.
Here's the board wiring diagram I've made. Please let me know if it seems intuitive.
George
winnard
- VelvetGeorge
- Site Owner
- Posts: 7233
- Joined: Tue Oct 14, 2003 5:12 pm
- Just the numbers in order: 13492
- Location: The Murder Mitten
- Contact:
- FMmark
- Senior Member
- Posts: 84
- Joined: Tue Mar 29, 2005 10:52 pm
- Location: Northern VA
- Contact:
George,
I noticed you have the ground symbol for each one of the ground points in the first layout, but personally, I think it would be a great help to indicate exactly where each ground point gets grounded to. (For the least possible noise/buzzing) Of course you might already have it covered in your step-by-steps, but that was the first thing that came to my mind. I know it's a given to all the guys who build amps a lot, but for guys like me who have only built a couple, (or none for that matter) concisely indicating the ground points might be appreciated by all.
Mark
I noticed you have the ground symbol for each one of the ground points in the first layout, but personally, I think it would be a great help to indicate exactly where each ground point gets grounded to. (For the least possible noise/buzzing) Of course you might already have it covered in your step-by-steps, but that was the first thing that came to my mind. I know it's a given to all the guys who build amps a lot, but for guys like me who have only built a couple, (or none for that matter) concisely indicating the ground points might be appreciated by all.
Mark
"Ah my dear Watson, you see, but you do not observe." Sherlock Holmes
http://www.funnymoneyband.com
http://www.funnymoneyband.com
- VelvetGeorge
- Site Owner
- Posts: 7233
- Joined: Tue Oct 14, 2003 5:12 pm
- Just the numbers in order: 13492
- Location: The Murder Mitten
- Contact:
- mightymike
- Senior Member
- Posts: 3757
- Joined: Tue Dec 28, 2004 8:53 pm
- Just the numbers in order: 13492
- Contact:
I like it George. They grey background lets you draw white wires, and I like the colors of the componets matching what they really look like.
As far as the grounding situation. I remember that I had to look at my 73 to double check the grounding on the under board filter, and the grounded
filter near the board. Sometimes I wonder if I over grounded, but the amp soudns killer, and that was a 100 watt project anyways.
All in all, your instructions are incredible. I could teach a kid how to build an amp with them. My 11 year old son for example already has GAS and wants to build. He's learning. See what you started? Now we have generations of amp builders here.
As far as the grounding situation. I remember that I had to look at my 73 to double check the grounding on the under board filter, and the grounded
filter near the board. Sometimes I wonder if I over grounded, but the amp soudns killer, and that was a 100 watt project anyways.
All in all, your instructions are incredible. I could teach a kid how to build an amp with them. My 11 year old son for example already has GAS and wants to build. He's learning. See what you started? Now we have generations of amp builders here.