I also think amps sound better inside the headcase; I thought it was purely psychological on my part, something to do with the satisfaction of it really being complete.......interesting that others say the same thing!!
I didn't have a Dremel here when I did my headcase screws, so I was stuck doing it all from the outside. Otherwise I would have done something like you're saying.
JTM 45 Cabinet
Moderator: VelvetGeorge
- Ricky Lee
- Senior Member
- Posts: 813
- Joined: Wed May 04, 2005 6:23 pm
- Just the numbers in order: 7
- Location: Iuka, Mississippi
- Contact:
Wonder who's off on their measurments here? I have the chassis centered exactly and yet the outside fonts are riding the faceplate cut-out. I looked at several original 45's (see top pic) and they have plenty of space between the fonts and cab. I measured the cut-out at 16 1/2" wide, I wonder what Marshall's cabs measure? From what I've seen of the original 45's there should be about a 3/8" clearance on each side of the fonts.
- Attachments
-
- jtm45 front.jpg
- (49.42 KiB) Downloaded 267 times
-
- Faceplate.jpg
- (119.06 KiB) Downloaded 273 times
May the good Lord take a liking to you!
http://s623.photobucket.com/albums/tt31 ... i%2012xxx/" onclick="window.open(this.href);return false;
http://s623.photobucket.com/albums/tt31 ... i%2012xxx/" onclick="window.open(this.href);return false;