Hi Guys,
Sometime ago i moded my JTM45 with some of the suggestions on the forum.
I put in a Tube Depo SS rectifier plug. I've decided to go back to the tube rectifier. While looking inside i noticed and remembered changing the resistor on Pin8 of V4 & V5, i think i did this for the plug in rectifier. I can't find a post that suggested it on the forum to verify. Any ideas?
Thank you
Ben
V4 & V5 Pin 8
Moderator: VelvetGeorge
-
- New Member
- Posts: 37
- Joined: Mon Mar 04, 2013 6:35 am
- Just the numbers in order: 13492
-
- Senior Member
- Posts: 1099
- Joined: Tue Sep 10, 2013 9:09 pm
- Just the numbers in order: 13492
Re: V4 & V5 Pin 8
The only resistor that I know of on pin 8 of your power tubeiass would be the 1ohm resistors used for checking the bias.