JTM-45 re issue PT

Get support and show off your MetroAmp JTM 45 kit builds.

Moderator: VelvetGeorge

Post Reply
jnew
Senior Member
Posts: 1577
Joined: Mon Jan 07, 2013 9:34 am
Just the numbers in order: 13492
Location: Front Row Seat From the Outer Continental Shelf

JTM-45 re issue PT

Post by jnew » Mon Nov 18, 2019 12:28 am

Anyone know where I can find specs or datasheet info on the Daganall D4192? Would like to try 5U4 tube rectifier but need to ensure this PT can support the 3 amp requirement vs. the 2 amp pulled from 5AR4/GZ34 on the 5V tap. :scratch:
________________________________
I SEE THINGS BETTER, WHEN I LISTEN


http://www.soundclick.com/bands/default ... ID=1214336" onclick="window.open(this.href);return false;

danman
Senior Member
Posts: 1099
Joined: Tue Sep 10, 2013 9:09 pm
Just the numbers in order: 13492

Re: JTM-45 re issue PT

Post by danman » Mon Nov 18, 2019 6:18 pm

I could not find the specs on the reissue PT but a quick way to check is to plug in the new rectifier and monitor the PT for excessive heat. If the 5u4gb is too much of a load, the PT will let you know by heating up. If the temperature stays the same as it does with the gz34, you will be fine. A little extra heat wouldn't worry me but the PT should not get excessively hot.

jnew
Senior Member
Posts: 1577
Joined: Mon Jan 07, 2013 9:34 am
Just the numbers in order: 13492
Location: Front Row Seat From the Outer Continental Shelf

Re: JTM-45 re issue PT

Post by jnew » Mon Nov 18, 2019 6:40 pm

Precisely what I am going to do. You read my mind. :rock:
________________________________
I SEE THINGS BETTER, WHEN I LISTEN


http://www.soundclick.com/bands/default ... ID=1214336" onclick="window.open(this.href);return false;

Post Reply