HI guys,
i have not yet installed my Kt66 pair but....
i'm using PT magnetic components part 40-18033 and
is 485V too high on v6 pin 2 and 8?
This is infecting everything else too. For example pin1 on
V1 is 235v
V2 is 195v
V3 is 272.
I'm getting 3.35VAC on all the heaters.
on V4 and V5 pin 5 is getting -46.5.
shall i proceed and plug in my KT66 pair?
Are things ok?
Thanks for any help
michael
485V too high? help!
Moderator: VelvetGeorge
-
- New Member
- Posts: 5
- Joined: Thu Dec 15, 2011 4:25 pm
- Just the numbers in order: 7
-
- Senior Member
- Posts: 5054
- Joined: Thu Apr 13, 2006 1:36 pm
- Just the numbers in order: 7
- Location: Drontheim. Norwegen
- Contact:
Re: 485V too high? help!
plugg in the tubes but watch the bias
http://www.myspace.com/20bonesband" onclick="window.open(this.href);return false;
http://www.myspace.com/prostitutes" onclick="window.open(this.href);return false;
Super 100 amps: 1202-119 & 1202-84
JTM45 RS OT JTM50 JMP50 1959/2203/34/39
http://www.myspace.com/prostitutes" onclick="window.open(this.href);return false;
Super 100 amps: 1202-119 & 1202-84
JTM45 RS OT JTM50 JMP50 1959/2203/34/39