How low can we go? LOL

jnew · Post by **jnew** » Tue Dec 01, 2015 11:04 pm

All right there for the taking fella's. We need clips from you players.

JimiJames · Post by **JimiJames** » Wed Dec 02, 2015 7:32 am

"It" goes monthly, and I should be able to by March...
Need to pick up a 2nd variac in that time.. Would be nice to have same models (like Ed's dual Ohmites''s), but at this point sounds like it is not necessary. I have recording ready with an SM57 w/op-amp mod into Nuendo or Protools... Just need an amp & my left hand to work and I'll hammer out some tones from the '69 SLP build when it's up and runnin'.
I asked to hear it dry trying to perk up the ears next to Ralle's that has no post effects. Also the wiring of that cab, if it was stock with stock gauge as that too plays a part with ohms/impedance/tone, but suspect not crucial at this point; liken to pickups. speakers, wood........
aka-selzter yes, but I I suspect some of the Silver lining lies in the studio; but it has to have "it" from core.
...

jnew · Post by **jnew** » Wed Dec 02, 2015 8:56 am

I can post it dry but not till I'm back home next Wed. But you are hearing "core" tone as I only have an SM-57 and an iMac. There is a touch of verb and delay but no EQ going in any way. The SM-57 is modded in that the transformer has been removed but I'm really curious to know about your SM-57 mod there Jimi boy.

Strat78 · Post by **Strat78** » Wed Dec 02, 2015 10:12 am

James, did you pull two tubs on these clips?

jnew · Post by **jnew** » Wed Dec 02, 2015 11:12 am

Yeah, just pulled the same tubes out of the 50 watter for as close a comparison as I could.

vanhalen5150 · Post by **vanhalen5150** » Thu Dec 03, 2015 10:03 am

So you have the second hooked up backwards?

jnew · Post by **jnew** » Thu Dec 03, 2015 10:19 am

Yeah. It's weird too because the impedance reads all over the place when measuring the secondary side and dialing the knob. Not in a steady way either. The primary side just measures a steady 3.2 ohms regardless of where the dial is.

JimiJames · Post by **JimiJames** » Thu Dec 03, 2015 10:43 am

My apologies James, it is exactly what you say: The Shure SM57 "Tape Op" Mod
( IIRC NY Chief posted a forum link for more scrutiny on this somewhere in the S&R section.)

jnew · Post by **jnew** » Thu Dec 03, 2015 11:42 am

Got it. I love the difference it made myself.

Tone Slinger · Post by **Tone Slinger** » Thu Dec 03, 2015 2:49 pm

Haven't been on the forums too much lately, but damn, that TYWHome clip is nothing short of AMAZING James ! You really have excellent recording abilities for sure (amongst many other things as well

)

jnew · Post by **jnew** » Thu Dec 03, 2015 7:37 pm

Thanks Andy.

Jeremy1283 · Post by **Jeremy1283** » Mon Dec 07, 2015 12:49 pm

love it jnew!

dnkhoward2 · Post by **dnkhoward2** » Fri Dec 25, 2015 12:20 pm

This is incredible! Thanks jnew and all involved for this great revelation. I will be incorporating this

jnew · Post by **jnew** » Fri Dec 25, 2015 12:57 pm

Report back when you do. And post clips if you can.

dnkhoward2 · Post by **dnkhoward2** » Sun Dec 27, 2015 8:15 pm

Will do jnew. Thanks again

Metropoulos Forum

How low can we go? LOL

Re: How low can we go? LOL

Re: How low can we go? LOL

Re: How low can we go? LOL

Re: How low can we go? LOL

Re: How low can we go? LOL

Re: How low can we go? LOL

Re: How low can we go? LOL

Re: How low can we go? LOL

Re: How low can we go? LOL

Re: How low can we go? LOL

Re: How low can we go? LOL

Re: How low can we go? LOL

Re: How low can we go? LOL

Re: How low can we go? LOL

Re: How low can we go? LOL