Can any one help ?
Metro 50 watt 2204
with ppmv dimed it sounds like a 2204
if I use the ppmv down low it turn to mud I loose all my highs , I have checked it is wired correctly
I just loose all my highs I am going for a mod 5 evh tone and have absolutely no sizzle ?
50x50 can on top
32x32 can on top
33x33 f&t on board
100k nfb to speaker jack
50 watt 2204 ppmv no highs
Moderators: VelvetGeorge, RACKSYSTEMS
-
- Senior Member
- Posts: 107
- Joined: Tue Jun 02, 2015 5:44 pm
- Just the numbers in order: 13492
- Location: Michigan
-
- Senior Member
- Posts: 621
- Joined: Mon Jun 21, 2010 1:16 pm
- Just the numbers in order: 7
Re: 50 watt 2204 ppmv no highs
ppimv messes up with the presence control... check if your presence is wired correctly and if you're using the correct capacitor... hope it helps
76' JMP 50w w/ 71' metro board
93' Fernandes SSS strat
93' Fender Japan HSS Strat
4x12 w/ 2x 25w rola creambacks /2x 25w m75 Scumbacks
93' Fernandes SSS strat
93' Fender Japan HSS Strat
4x12 w/ 2x 25w rola creambacks /2x 25w m75 Scumbacks
-
- Senior Member
- Posts: 107
- Joined: Tue Jun 02, 2015 5:44 pm
- Just the numbers in order: 13492
- Location: Michigan
Re: 50 watt 2204 ppmv no highs
I got it !!!
it was my fault i had some perositic osillation from one of my wires ,amp smokes now ,thanks buddy for your suggestion !!!
time to giver her the dutch treatment now
it was my fault i had some perositic osillation from one of my wires ,amp smokes now ,thanks buddy for your suggestion !!!
time to giver her the dutch treatment now
mike