George I see that you have some larger CF resistors(2w ?) that span the full width of the board between the turrets on the loaded boards that you sell. Where did you get those from? Do you sell these? I am looking for a 820R,10k, and a 4k7. Any help would be appreciated.
Thanks
Tim
Carbon Film Resistors/ Long Leads
Moderator: VelvetGeorge
-
- Senior Member
- Posts: 93
- Joined: Wed Aug 16, 2006 6:47 pm
-
- Senior Member
- Posts: 93
- Joined: Wed Aug 16, 2006 6:47 pm
Found some Stackpole 2w Carbon Film resistors from Handmade Electronics. Their leads are the same length as the 2W metal oxide resistors that George sells. They will stretch the full width of the board.
Here is a link
http://www.hndme.com/productcart/pc/vie ... ategory=10
They do require a $14 minimum order so I ordered a solder tip cleaner and a refill for it to make the the min order.
http://www.hndme.com/productcart/pc/vie ... tegory=186
Great packing and fast shipping.
Here is a link
http://www.hndme.com/productcart/pc/vie ... ategory=10
They do require a $14 minimum order so I ordered a solder tip cleaner and a refill for it to make the the min order.
http://www.hndme.com/productcart/pc/vie ... tegory=186
Great packing and fast shipping.
-
- Senior Member
- Posts: 8566
- Joined: Fri Dec 10, 2004 8:49 pm