Page 1 of 1
Zero Loss FX Loop Toggle
Posted: Sat Nov 03, 2018 7:21 am
by Brad H
Has anyone removed the level switch from the loop board and replaced with a toggle that mounts on the chassis? I’d like to try this so the chassis doesn’t have to be removed to switch from pedals to rack effects. If anyone has done it, please share how!
Re: Zero Loss FX Loop Toggle
Posted: Mon Nov 12, 2018 9:18 am
by Brad H
Okay, so I suppose a more specific question would be...when replacing the onboard line level switch with an externally mounted toggle, do I jumper the two sides together like on the in/bypass toggle?
Re: Zero Loss FX Loop Toggle
Posted: Wed Nov 14, 2018 1:03 am
by axeman
I can't remember, but I can open my 68 and look on Thursday.
Re: Zero Loss FX Loop Toggle
Posted: Thu Nov 15, 2018 6:42 am
by Brad H
I want to say yes, because technically the original cts 206-211 is a dpst switch. So the dpdt switch would be jumpered on lugs 5-6 to work like dpst. But I’d sure like to know for sure!! I can’t get answer from anyone, like it’s top secret or something!