PT - Marshall Super Tremelo '71 - help identify
Moderator: VelvetGeorge
-
- Senior Member
- Posts: 99
- Joined: Sat Jun 17, 2006 10:43 am
PT - Marshall Super Tremelo '71 - help identify
Just pulled this PT out of my Marshall 110w Super Tremelo, year 7-1-1971. Can someone help identify the transformer type and the suitable replacements please?
- Attachments
-
- photo 4.JPG (87.47 KiB) Viewed 1478 times
-
- photo 2.JPG (153.51 KiB) Viewed 1478 times
-
- photo 1.JPG (113.9 KiB) Viewed 1479 times
- neikeel
- Senior Member
- Posts: 7231
- Joined: Tue Dec 06, 2005 8:31 am
- Location: Suffolk, England
Re: PT - Marshall Super Tremelo '71 - help identify
Presume this is a follow up to the thread in the repairs and restoration thread
That PT is a Dagnall PT and will correspond to a T2562 type that can be supplied by our hosthttp://forum.metroamp.com/viewtopic.php?f=42&t=41208 or by Brian Wallace http://www.marstran.com/T2562.htm
Both can be supplied in stand up style so that you can reuse your end bells. If you use these you can have the original wire colouring scheme too. Lace the loom in the right layout and it will look totally stock.
Edited for spelling!
That PT is a Dagnall PT and will correspond to a T2562 type that can be supplied by our hosthttp://forum.metroamp.com/viewtopic.php?f=42&t=41208 or by Brian Wallace http://www.marstran.com/T2562.htm
Both can be supplied in stand up style so that you can reuse your end bells. If you use these you can have the original wire colouring scheme too. Lace the loom in the right layout and it will look totally stock.
Edited for spelling!
Last edited by neikeel on Tue Jun 04, 2013 4:35 am, edited 1 time in total.
Neil
- ampSnob
- Senior Member
- Posts: 344
- Joined: Thu Jan 05, 2006 6:15 pm
Re: PT - Marshall Super Tremelo '71 - help identify
+1 to what Neikeel said. Both excellent replacements.
I'm curious, if you took off an end bell, does the cut out on the laminations for 2 big screws have a smooth U shape or more sharp right angle notches?
Here's a pic of each type of transformer to show what I'm talking about:
http://s172.photobucket.com/user/Mxzx44 ... 0.jpg.html
I'm curious, if you took off an end bell, does the cut out on the laminations for 2 big screws have a smooth U shape or more sharp right angle notches?
Here's a pic of each type of transformer to show what I'm talking about:
http://s172.photobucket.com/user/Mxzx44 ... 0.jpg.html