Dagnall t3556 any info???

All about iron and copper.

Moderator: VelvetGeorge

Post Reply
Joshabr1
Senior Member
Posts: 205
Joined: Fri Aug 23, 2013 1:26 pm
Just the numbers in order: 13492

Dagnall t3556 any info???

Post by Joshabr1 » Tue May 27, 2014 9:16 pm

Can't find anything about these pts. Anybody know when they were used? My 74 has one.

FrankieFeenixx
Senior Member
Posts: 72
Joined: Mon Dec 04, 2006 7:49 pm
Just the numbers in order: 7
Location: Austin, TX

Re: Dagnall t3556 any info???

Post by FrankieFeenixx » Thu May 29, 2014 10:14 pm

Joshabr1 wrote:Can't find anything about these pts. Anybody know when they were used? My 74 has one.

Never seen a T3556. There was a T3560 that was used in Canadian-market 50W Marshalls.

Joshabr1
Senior Member
Posts: 205
Joined: Fri Aug 23, 2013 1:26 pm
Just the numbers in order: 13492

Re: Dagnall t3556 any info???

Post by Joshabr1 » Fri May 30, 2014 9:58 am

Well it exists. My amp has it. And another member here goes by maxwedge has a amp close to mine in date that has the 3556 as well.

User avatar
Brian Wallace
Supporting Advertiser
Posts: 873
Joined: Thu Mar 03, 2005 10:45 pm
Just the numbers in order: 7
Location: Michigan
Contact:

Re: Dagnall t3556 any info???

Post by Brian Wallace » Sun Jun 01, 2014 10:21 am

I don't have any info on this PT as of yet. If you are willing to take some voltage readings and email them to me I at least start a file on it.
Patience is a virtue.

Wallace amps

Wallace forum

Joshabr1
Senior Member
Posts: 205
Joined: Fri Aug 23, 2013 1:26 pm
Just the numbers in order: 13492

Re: Dagnall t3556 any info???

Post by Joshabr1 » Mon Sep 22, 2014 9:57 pm

Brian have u uncovered anything on these?

V8
Senior Member
Posts: 128
Joined: Wed May 25, 2005 4:34 pm
Just the numbers in order: 13492
Location: T-Ville CT

Re: Dagnall t3556 any info???

Post by V8 » Wed Apr 15, 2015 9:20 am

Resurrecting this thread, I have a 1970 metal panel sporting a T3556 & want to know if anyone else has taken some voltage measurements ?
The one I have 348vac secondary & heaters are at 6.0vac.

also posted at Marstran
http://forum.marstran.com/viewtopic.php?f=20&t=608

Thanks,
David
?

Post Reply