help with choosing pt for jtm45+ build

All about iron and copper.

Moderator: VelvetGeorge

Post Reply
danwelsh
Senior Member
Posts: 56
Joined: Mon Sep 15, 2014 2:35 pm
Just the numbers in order: 13492

help with choosing pt for jtm45+ build

Post by danwelsh » Wed Oct 01, 2014 7:15 pm

Hi. I'm new to this forum......I'm looking for some help with pt choices for my jtm45+ build......I would like to use the dagnall 4192 pt from marstran but am unsure of the difference between that one and the pt that tubedepot offers for the jtm45 build. I emailed tubedepot and received a reply that I could use the dagnall 4192 328-0-328 as long as the specs were appropriate and I made the necessary adjustments. ......could someone please enlighten me on this and tell me if these pt are the same? Thanks for any help on this as I'm new to amp building and want to do everything correctly.

danwelsh
Senior Member
Posts: 56
Joined: Mon Sep 15, 2014 2:35 pm
Just the numbers in order: 13492

Re: help with choosing pt for jtm45+ build

Post by danwelsh » Mon Oct 06, 2014 4:03 pm

Ignore this post fellas.....I ordered the recommended one in the build instructions

Post Reply