Heyboer vs MM.

All about iron and copper.

Moderator: VelvetGeorge

User avatar
VelvetGeorge
Site Owner
Posts: 7233
Joined: Tue Oct 14, 2003 5:12 pm
Just the numbers in order: 13492
Location: The Murder Mitten
Contact:

Heyboer vs MM.

Post by VelvetGeorge » Wed Jun 07, 2006 2:40 pm

Heyboer vs Mercury Magnetics. What's the difference? And how should I choose?


Heyboer and Mercury Magnetics are transformer manufacturers. Each offers power, output and chokes for Marshalls and many other amplifiers. Actually, several versions of the parts found in classic amps over the years. Take the JTM 45 output transformer, for example. There were many different types found stock from at least two different suppliers. The Radio Spares output came in nearly a dozen different configurations alone.

Both companies have compiled specs from these parts first hand by tearing down blown examples for rewinding. Each part, material, wire, gauge and interleave is documented and recreated. MM and their absolute genius leader, Sergio have probably documented and recreated more of these classic transformers than most other companies combined. To call them transformer experts would be an understatement.

So, if everyone recreates these parts from complete teardowns, why are they all different?

Several reasons. For one, these parts varied enough that unless two companies recreated the exact same part, you would find (and hear) differences.
Secondly, documentation and part numbering often left much to be desired. It's hard to know that you are comparing recreations of the same part.
Thirdly, manufacturing process. Modern machines are limited in most cases to even numbers of alternating laminations and only four interleaved windings (without additional set up). Thus, being completely accurate is expensive and labor intensive. It's easy to see why a transformer with a hand assembled core and several interleaved winds costs several times what a typical machine made part costs.
Lastly, materials. Since these parts were originally made, steel and copper have changed. Modern materials are more precise and often higher quality. Today’s M6 steel is more efficient than it's 35-year-old equivalent. Which changes the core characteristics. Great for cool running power transformers, but not so good for output transformer cores where you want them to saturate in a musical way.
Other modern materials such as plastic and Teflon have replaced paper and fish paper. Which affects tone.

Transformer manufactures have to consider these (and many other) factors when "recreating" classics. One approach is to use modern materials and compensate for their tonal affects. MM parts use modern materials, but Sergio compensates for core saturation and other technical details. Things beyond the scope of this. Heyboer, by comparison uses closest modern equivalents of classic materials. Heyboer will also build to any specs you supply. As in the case of my Dagnall C1998 clone output transformer.

For my Dagnall clone, I used two examples of this output. One from Nov/Dec '67, a very early example. And a second from mid '69.
Not being a transformer designer or engineer, recreating this part took several trial and error prototypes and critical listening sessions. In the end, exact wind and interleaving combined with custom stamped and hand annealed steel, paper bobbin, self leads and many other details were required to make the recreation behave and sound accurate to the originals.

Getting back on topic re: Heyboer vs MM.
Which one sounds more like the originals? Both are very good, and miles beyond typical stock transformers. I would say they are different takes on the same theme, when comparing recreations of the same vintage part.
The MM parts tend to have a more open, extended high end to my ears. Very complex tone, notes and harmonics jump out from under your fingers. They sound very alive. I also find them to feel faster compared the Heyboer parts. Which tend to sound and feel blusier, for lack of a better term. Slightly slower and more like a transformer that has aged 35 years. Both parts share a musical, three dimensional characteristic.

Is it worth the extra cost for the MM? Absolutely. You're paying for hand assembly in many cases, tonal expertise and the piece of mind of knowing that these guys have seen every variation of classic iron.
Not to discount Heyboer, though. Their off the shelf parts are still a major upgrade over stock components.

How should I decide which is right for me? If there was an easy answer, this would have been a much shorter article. But there are some things I can mention to help point you in the right direction:

Do you want a JTM45 output? Or a Radio Spares deluxe replica, from early '65 with 6.6k primary, tag board and 16 only tap? If you need a very specific part, MM may be the best option. They have dozens of variations of most parts and can suggest the most accurate part for a specific amp or model.
If you want to build a mid 60's JTM 45 clone, either brand can get you there. With extremely good results.

Are you a builder/hobbyist who knows tranny specs and wants to experiment? If so, call Heyboer and give them your specs. They can build what you want at a fair price and you can tweak from there.

Do you just want the best EVH output transformer money can buy period? If so, get the O100JM-SL from MM and spend several hours a day working on your technique.

Do you have a classic amp with a blown part that you want to replace and not change the tone? The bad news is that nothing really sounds like a 35-year-old tranny. Especially one that has been on it's last leg for a while. Fortunately, either of these parts will get your amp sounding like it would have sounded earlier in it's life.
Once again, if you need a very specific part MM is more likely to have it documented and on the shelf.

Are you building a kit? In this case select whichever part appeals to you more. You can't go wrong with either brand. And you'll need to refine and upgrade other parts in the kit considerably before the transformers are the weakest link. At which point you'll have a truly world class amp.

I hope this helps and answers more questions than it raises. Let me close by saying that I am not a transformer designer or engineer. But I have good ears and I try to represent these companies and their products as accurately and sincerely as possible.
My opinions come from using these products personally and selling 100's of them over the years. Also from comparing them to originals, which is what I consider the benchmark for any recreation.
I encourage everyone to educate yourself and make informed choices. Your best source for info is to contact these companies directly. Both have excellent customer service and are happy to answer your questions.
Don't forget that there are many other transformer options available too. OEI, Marstran, Mojo, Weber ect.

george
Check out Plexi Replicas for my personal amp builds...
Image

User avatar
tonejones
Senior Member
Posts: 681
Joined: Mon Dec 13, 2004 3:28 am

Post by tonejones » Wed Jun 07, 2006 3:06 pm

Great post George!!!!
Let's get going, 'cause there's too much music, too little time!!!!

User avatar
rockstah
Senior Member
Posts: 12481
Joined: Thu Sep 15, 2005 12:28 pm
Just the numbers in order: 7
Location: Austin Texas

Post by rockstah » Wed Jun 07, 2006 4:33 pm

my first build has a MM -SL OT and Georges dual tap heyboer (i think it is).

maybe with my new build which has an extra preamp tube - it will be a monster amp.. maybe ill try heyboer this time? the metroamp OT and the heyboer PT with 475dcv on the plates.

my third amp will be 12 series with ****** trannys. thats down the road alittle bit.

so im thinking maybe this time ill give the heyboer route a shot, just because. ;)

what say you?

pongo316
Senior Member
Posts: 252
Joined: Mon Mar 27, 2006 3:53 pm

Post by pongo316 » Wed Jun 07, 2006 6:37 pm

Great post George, Informative & Intresting

User avatar
rockstah
Senior Member
Posts: 12481
Joined: Thu Sep 15, 2005 12:28 pm
Just the numbers in order: 7
Location: Austin Texas

Post by rockstah » Wed Jun 07, 2006 7:38 pm

so i wonder - i kind of look at MM OT as one that has lots of highs and harmonics - perhaps almost in a compensating way ( added ) compared to a heyboer which maybe alittle more "true" and ya really get what ya get out of it based on the spec.

what say you?

Mark

bluefuzzguitar
Senior Member
Posts: 329
Joined: Thu Oct 23, 2003 6:15 pm
Location: Nijmegen, Holland (Europe)
Contact:

Post by bluefuzzguitar » Thu Jun 15, 2006 4:50 pm

I have an 0100JM-SL output tranny in my RI plexi and a Heyboer power tranny. I think it's the best of both worlds. I'd seriously recommend this upgrade.

Mike
There's no tone like your own

bluze81
Senior Member
Posts: 1402
Joined: Tue Jun 27, 2006 8:36 am
Just the numbers in order: 7
Location: paradise mid america, los angeles CA native

Post by bluze81 » Sun Jul 02, 2006 7:27 pm

I have a MM axiom 50 output and MM choke in a 1987x it still has the orig, power transf, if I change the power tranny out to MM would there be a change in the tone of the amp? bluze

User avatar
rockstah
Senior Member
Posts: 12481
Joined: Thu Sep 15, 2005 12:28 pm
Just the numbers in order: 7
Location: Austin Texas

Post by rockstah » Mon Oct 16, 2006 11:51 am

bluze81 wrote:I have a MM axiom 50 output and MM choke in a 1987x it still has the orig, power transf, if I change the power tranny out to MM would there be a change in the tone of the amp? bluze
if it produced a different B+ - yes

if its the same B+ between the new and old PT - i have read it will make difference as far as sag, some pt's sag more than others i assume.

User avatar
novosibir
Senior Member
Posts: 4654
Joined: Tue Nov 22, 2005 2:32 pm
Just the numbers in order: 7
Location: Nuernberg, Germany
Contact:

Post by novosibir » Mon Oct 16, 2006 3:24 pm

rockstah wrote:
bluze81 wrote:I have a MM axiom 50 output and MM choke in a 1987x it still has the orig, power transf, if I change the power tranny out to MM would there be a change in the tone of the amp? bluze
if it produced a different B+ - yes

if its the same B+ between the new and old PT - i have read it will make difference as far as sag, some pt's sag more than others i assume.
Right, all as Mark already said!

Larry
The fault almost always is sitting in front of the amp :wink:

Larry's Website now with included Pix's Gallery

Billy Batz
Senior Member
Posts: 8566
Joined: Fri Dec 10, 2004 8:49 pm

Post by Billy Batz » Tue Oct 17, 2006 4:03 pm

That has to do with how much current its rated to handle right Larry? The lower the current its rated for, the more it sags.

User avatar
novosibir
Senior Member
Posts: 4654
Joined: Tue Nov 22, 2005 2:32 pm
Just the numbers in order: 7
Location: Nuernberg, Germany
Contact:

Post by novosibir » Tue Oct 17, 2006 7:37 pm

There are basically 2 factors, which are causing sag in/across the PT.

1) The secondary's - but also the primary's - winding resistance. After Ohm's law the voltage drop across the winding is the product of copper resistance * pulled current. So the more current you're pulling out of the PT, the more voltage is going lost internal across the PT's windings.

2) The iron - means, the core's dimension, the sheet metal's quality AND the accuracy, how proper the sheet metal has been fitted into the bobbin. As soon as the core is driven into saturation, the secondary's voltage is dropping down overproportional, because the PT has reached its limit - and when you're pulling still more current, the power doesn't rise anymore, because that's the product of current and voltage.

Shure, there are some more factors - but it would be too complex and confusing, to explain it all.

Larry
The fault almost always is sitting in front of the amp :wink:

Larry's Website now with included Pix's Gallery

User avatar
5150loveeddie
Senior Member
Posts: 3340
Joined: Mon Apr 12, 2004 8:52 pm
Just the numbers in order: 13492
Location: Montreal, Quebec CANADA

Post by 5150loveeddie » Tue Oct 17, 2006 7:58 pm

Larry just plain ROCKS

You rock Larry
Glutathione increase specialist

http://www.max.com/science/448523/full/ ... lutathione" onclick="window.open(this.href);return false;

User avatar
novosibir
Senior Member
Posts: 4654
Joined: Tue Nov 22, 2005 2:32 pm
Just the numbers in order: 7
Location: Nuernberg, Germany
Contact:

Post by novosibir » Tue Oct 17, 2006 8:06 pm

. . :D
. :D :D
:D :D :D

L :D rry
The fault almost always is sitting in front of the amp :wink:

Larry's Website now with included Pix's Gallery

MARCO
Senior Member
Posts: 1029
Joined: Tue Jan 03, 2006 1:03 am
Location: IL

Post by MARCO » Sat Oct 21, 2006 6:16 pm

Heyboer=PUKE
MM=GOLD
:P
MARC34

User avatar
Guitar Adjuster
Senior Member
Posts: 1560
Joined: Mon Oct 31, 2005 8:34 pm
Location: San Antonio

Post by Guitar Adjuster » Sat Oct 21, 2006 10:19 pm

MARCO wrote:Heyboer=PUKE
MM=GOLD
:P
Ok, what is ******? And why is Heyboer=PUKE? Just curious....

Post Reply