FIXED!!!!!!!!
The second channel wire going to pin 2 got pinched under the board between the nut and the board. Some of the shielding got scraped back and a small amout of wire was making contact with the standoff. I replaced it and now we're making rockings. Channel 1 is a little to bright for me. Do raise or lower the value of the bright cap to tame this?
No sound channel 2. New build FIXED!!!!!
Moderator: VelvetGeorge
-
- Senior Member
- Posts: 164
- Joined: Tue Sep 25, 2007 10:54 pm
- Contact:
Re: No sound channel 2. New build
http://www.myspace.com/bigterrible" onclick="window.open(this.href);return false;
- YMI5150?
- Senior Member
- Posts: 982
- Joined: Tue Feb 02, 2010 3:38 pm
- Just the numbers in order: 13492
- Location: Los Gatos, CA
- Contact:
Re: No sound channel 2. New build FIXED!!!!!
Congrats!
Assuming bypass cap, increase value to thinker things up.
Assuming bypass cap, increase value to thinker things up.
-
- Senior Member
- Posts: 164
- Joined: Tue Sep 25, 2007 10:54 pm
- Contact:
Re: No sound channel 2. New build FIXED!!!!!
Thank you everyone for your help. I settled on a 47pf bright cap on the channel 1 volume pot. Amp sounds great and is very quiet.
http://www.myspace.com/bigterrible" onclick="window.open(this.href);return false;
- toner
- Senior Member
- Posts: 2582
- Joined: Sun Dec 03, 2006 7:57 pm
- Location: Iowa
Re: No sound channel 2. New build FIXED!!!!!
Good call, OnTheFritz! I had a similar problem with an NFB wire once. It's always the last thing you suspect.
-
- Senior Member
- Posts: 164
- Joined: Tue Sep 25, 2007 10:54 pm
- Contact:
Re: No sound channel 2. New build FIXED!!!!!
In my excitement I neglected to thank On The Fritz. Thank you sir!!!!
Neikeel, thank you for getting my bias straight. I definitely would not have been able to figure that out on my own.
Dan
Neikeel, thank you for getting my bias straight. I definitely would not have been able to figure that out on my own.
Dan
http://www.myspace.com/bigterrible" onclick="window.open(this.href);return false;
-
- Senior Member
- Posts: 1839
- Joined: Wed Jan 21, 2004 12:30 am
- Location: Warren, Mi
Re: No sound channel 2. New build FIXED!!!!!
No worries, glad you got it worked out!Fever Dog wrote:In my excitement I neglected to thank On The Fritz. Thank you sir!!!!
"I don't like country music, but I don't mean to denigrate those who do. And for the people who like country music, denigrate means 'put down' " - Bob Newhart