Not your typical 50 watt plexi clip

Get support and show off your MetroAmp 50 Watt kit builds.

Moderator: VelvetGeorge

Post Reply
Crunchboy
Senior Member
Posts: 400
Joined: Tue Sep 28, 2004 7:01 pm
Contact:

Not your typical 50 watt plexi clip

Post by Crunchboy » Mon Feb 26, 2007 10:48 pm

Spent a little time recording and having fun today. I guess I'm on a Sabbath trip lately. Anyway, here's a 1987X plexi reissue dimed, boosted with an eq on the left side and an SD1 on the right and lead tracks. Ultimate Attenuator in use.

If you are a soundclick member, download the .mp3. They butchered the stream on me.

http://www.soundclick.com/util/download ... E2EF6BBB-B

Kasper5150
New Member
Posts: 6
Joined: Tue Feb 06, 2007 10:46 am

Post by Kasper5150 » Thu Mar 01, 2007 11:49 am

sounded great man.....real smooth...and crunchy as well

Did you use the sd-1 panned right at all times or only for the leads?

Crunchboy
Senior Member
Posts: 400
Joined: Tue Sep 28, 2004 7:01 pm
Contact:

Post by Crunchboy » Thu Mar 01, 2007 3:57 pm

Kasper5150 wrote:sounded great man.....real smooth...and crunchy as well

Did you use the sd-1 panned right at all times or only for the leads?
Thanks, man. The SD1 is clean-boosting (level maxed, gain 0) on the right track and the lead track. The left is an eq pedal is set with all the eq faders flat (for a full-range boost) and level bumped up about 8 db's. I am just LOVING this 50 watt plexi with the Ultimate Attenuator.

User avatar
Devon8822
Senior Member
Posts: 436
Joined: Thu Nov 02, 2006 5:55 pm
Just the numbers in order: 7
Location: Toronto

Post by Devon8822 » Fri Mar 02, 2007 3:13 pm

That was awsome Crunchboy, simply great tone. and to complement it with some Sabbath! oh boy.... I am seeing Sabbath on March 22 they are doing a Canadian tour, its gunna be legendary! 8)

User avatar
rockstah
Senior Member
Posts: 12481
Joined: Thu Sep 15, 2005 12:28 pm
Just the numbers in order: 7
Location: Austin Texas

Post by rockstah » Fri Mar 02, 2007 6:17 pm

nice one Todd. 8)

Crunchboy
Senior Member
Posts: 400
Joined: Tue Sep 28, 2004 7:01 pm
Contact:

Post by Crunchboy » Sat Mar 03, 2007 6:10 pm

Thanks, fellow forumites.

Post Reply