Metro 50w - mains fuse keeps blowing
Moderator: VelvetGeorge
-
- Senior Member
- Posts: 174
- Joined: Tue Mar 15, 2011 5:16 pm
- Just the numbers in order: 13492
- Location: North Texas
- Contact:
Metro 50w - mains fuse keeps blowing
Need help! I was able to bias and test the amp - then after about 30 minutes of playing, the mains fuse blew - and now it keeps blowing. Removed power and preamp tubes, but the mains fuse still keeps blowing (HT fuse does not blow) when I power on (amp is on standby) ...any ideas as to what may be causing this? My fear is I have a blown PT and the fuse is just doing its job...finally I have an Arrow DPST for the power and a Carling SPST for the standby switch - defintely wired correctly.
- Attachments
-
- pic1.jpg
- (340.7 KiB) Downloaded 623 times
-
- Senior Member
- Posts: 1839
- Joined: Wed Jan 21, 2004 12:30 am
- Location: Warren, Mi
Re: Metro 50w - mains fuse keeps blowing
I had a similar situation, thinking it was the PT. Threw in a back up PT, same problem. Turned out to be a dodgy bridge rectifier that failed.
"I don't like country music, but I don't mean to denigrate those who do. And for the people who like country music, denigrate means 'put down' " - Bob Newhart
-
- Senior Member
- Posts: 174
- Joined: Tue Mar 15, 2011 5:16 pm
- Just the numbers in order: 13492
- Location: North Texas
- Contact:
Re: Metro 50w - mains fuse keeps blowing
Bridge rectifier tested fine...ugh