JMP 50W V3 Voltages
Posted: Wed Jun 17, 2015 6:49 pm
Hi All,
I have completed a build of jump 50 watt, lead spec. Everything seems to be all right, however there is one thing that is not clear to me.
I measure voltages and all of them are in line with the voltage chart in the kit instructions, except for voltages on V3.
Chart shows that
V3 pin 1 = 208V and V3 pin 6 = 200V.
I measure
V3 pin 1 = 176V and V3 pin 6 = 170V
What could cause this discrepancy?
Thanks,
Alex.
I have completed a build of jump 50 watt, lead spec. Everything seems to be all right, however there is one thing that is not clear to me.
I measure voltages and all of them are in line with the voltage chart in the kit instructions, except for voltages on V3.
Chart shows that
V3 pin 1 = 208V and V3 pin 6 = 200V.
I measure
V3 pin 1 = 176V and V3 pin 6 = 170V
What could cause this discrepancy?
Thanks,
Alex.