1203-80-ML and 1203-80-MS

Moderator: VelvetGeorge

Post Reply
User avatar
VelvetGeorge
Site Owner
Posts: 7233
Joined: Tue Oct 14, 2003 5:12 pm
Just the numbers in order: 13492
Location: The Murder Mitten
Contact:

1203-80-ML and 1203-80-MS

Post by VelvetGeorge » Tue Apr 03, 2007 2:44 pm

Here are my stand up and laydown mount 100 watt power transformers.

The extra voltage taps are now standard.


VG
Attachments
1203-80-MS.gif
1203-80-MS.gif (28.6 KiB) Viewed 9039 times
1203-80-ML.gif
1203-80-ML.gif (27.03 KiB) Viewed 9037 times
Check out Plexi Replicas for my personal amp builds...
Image

User avatar
VelvetGeorge
Site Owner
Posts: 7233
Joined: Tue Oct 14, 2003 5:12 pm
Just the numbers in order: 13492
Location: The Murder Mitten
Contact:

Post by VelvetGeorge » Mon May 21, 2007 5:49 pm

A note about the 1203-80-MS: the wire color for the high voltage secondary and 80% taps was reversed on some parts.
According the to diagram above, red is the full secondary (500V) and blue is the 80% taps. On some parts it is opposite.

To be certain which type you have, measure resistance across the winds: red to red and blue to blue.

The high voltage wires will measure 17-18 ohms. The 80% taps will measure 13-14 ohms.

Note that most meters are not terribly accurate at low resistance readings. But one set of wires will read approx 80% of the larger measurement.


george
Check out Plexi Replicas for my personal amp builds...
Image

Post Reply