Hey guys,
I've been having some issues with my 100w plexi kit. I'm wondering if anyone can tell me how to figure if my PT is no good.
Symptoms are:
- The amp is about 1/4 as loud as my JCM 800 100w head at full volume
- I have a very audible hum coming through the speakers that sounds exactly like the PT hum when turned on
- The first few months I had the kit together the Mains fuse blew almost anytime I tried a new power source.
- The amp sounds pretty great though other than the really high noise ratio. Lots of hiss.
I'd be grateful for any input.
Thanks,
J-C
Diagnosing a bad power transformer
Moderator: VelvetGeorge
-
- New Member
- Posts: 25
- Joined: Tue Feb 09, 2010 8:01 pm
- Just the numbers in order: 7
- jbzoso2002
- Senior Member
- Posts: 1089
- Joined: Tue May 17, 2005 12:01 pm
- Just the numbers in order: 7
- Location: NW Indiana
Re: Diagnosing a bad power transformer
Check this out:
http://www.geofex.com/ampdbug/ampdebug.htm" onclick="window.open(this.href);return false;
Jimmy
http://www.geofex.com/ampdbug/ampdebug.htm" onclick="window.open(this.href);return false;
Jimmy
The right of the people to keep and bear arms shall not be infringed