1959HW PPIMV & Zero Loss FX Loop Placement

Discuss your builds of MetroAmp Kits.

Moderator: VelvetGeorge

Post Reply
flaviocatalano
New Member
Posts: 1
Joined: Fri Nov 16, 2012 8:26 am
Just the numbers in order: 13492

1959HW PPIMV & Zero Loss FX Loop Placement

Post by flaviocatalano » Mon Jun 09, 2014 12:21 pm

Hi there,
this is Flavio from Italy!

I'm quite novice in modding my amp and I've succesfully installed a PPIMV a few months ago.
Now it's time to get an FX Loop but suddenly a question...
What if I use my amp live/reharsal at about 1/2 PPIMV and treble ch. at 8?
Is the loop working fine acting as it also with that much PI distortion?

I'd like to put some time based effects (delays/revs) a pseudo leslie (strymon Lex) and a little vol boost just to cut through during solos and stuff and I fear that I'll get some troubles getting clear sounds out of it...

Can someone help me clarify this?

Cheers and Best regards from Milan, Italy
Flavio

henter2015
New Member
Posts: 5
Joined: Wed Feb 03, 2016 5:16 am
Just the numbers in order: 13492

Re: 1959HW PPIMV & Zero Loss FX Loop Placement

Post by henter2015 » Thu Mar 24, 2016 5:04 pm

sorry for resurrecting the post, but I just installed a Zero loss on a 59 with a PPIMV and when using the MV the effects distort as well... any way to solve this? :what:

Post Reply