Hello guys,
I'm a new member of the forum.
I write here because i recently have installed PPIMV mod from a technician near home.
It sounds OK, but when i set to 0 Master and Gain and left PPIMV at like 8, some signal pass throught the amp.
It's OK? It's not a real problem, i want only to be sure it's wired well. Thanks!
PPIMV on JCM 800
Moderator: VelvetGeorge
-
Valley
- New Member
- Posts: 2
- Joined: Tue Oct 07, 2014 4:08 am
- Just the numbers in order: 13492
-
stef
- Senior Member
- Posts: 1407
- Joined: Fri Mar 12, 2010 9:05 pm
- Just the numbers in order: 7
Re: PPIMV on JCM 800
My SL does not have a PPIMV but I can hear a signal (guitar) with Volume 1 on 0, so I guess it is normal. If you have any more concerns about the amp post pictures of the PPIMV...
What I can remember is that with the PPIMV on 0 there should not be any sound
What I can remember is that with the PPIMV on 0 there should not be any sound
-
Valley
- New Member
- Posts: 2
- Joined: Tue Oct 07, 2014 4:08 am
- Just the numbers in order: 13492
Re: PPIMV on JCM 800
In fact when all 2 volume knob are set to 0 the amp is silent, i think it's normal because PPIMV works with another volume pot. Thanks!