More hiss with metro loop fx
Moderator: VelvetGeorge
-
- Senior Member
- Posts: 98
- Joined: Sat Oct 10, 2015 5:55 pm
- Just the numbers in order: 13492
More hiss with metro loop fx
Hi, i have installed zero loss fx on my jcm800 but i have two problem, the first il the noise, more hiss tha before install it, the second with master on 0 and gain pot open i can hear the sound of my guitar, why? Before Loop I have not this problem
-
- Senior Member
- Posts: 1644
- Joined: Sun Feb 26, 2006 6:24 am
- Just the numbers in order: 13492
- Location: MI
- Contact:
Re: More hiss with metro loop fx
In a quick look at your pics in another thread, I see you have the loop installed with the component side facing the tube sockets. Upside down compared to the loop instructions. The loop board has a built in ground plane, a shield ,on its bottom side. With your board upside down like that, that shield is useless/defeated.
So, try flipping the board around 180 degrees as it is shown in the loop instructions. Sounds like you are still working through other issues, but this should help remedy your issues here.
So, try flipping the board around 180 degrees as it is shown in the loop instructions. Sounds like you are still working through other issues, but this should help remedy your issues here.