New Zero Loss FX loop Rev 4 - now available, and on sale!

Discuss your builds of MetroAmp Kits.

Moderator: VelvetGeorge

Post Reply
User avatar
VelvetGeorge
Site Owner
Posts: 7233
Joined: Tue Oct 14, 2003 5:12 pm
Just the numbers in order: 13492
Location: The Murder Mitten
Contact:

New Zero Loss FX loop Rev 4 - now available, and on sale!

Post by VelvetGeorge » Wed Nov 25, 2015 10:35 am

Happy to announce the new revision of the Zero Loss Loop. Rev 4 adds level switching on board.

These loops are on sale until Wed December 2nd. $65 each represents $20 off per kit!

Image

george
Check out Plexi Replicas for my personal amp builds...
Image

stormbringer
New Member
Posts: 2
Joined: Wed Aug 27, 2014 10:47 am
Just the numbers in order: 13492

Re: New Zero Loss FX loop Rev 4 - now available, and on sale

Post by stormbringer » Thu Nov 26, 2015 9:09 am

Are the mounting dimensions (spacing between jacks, etc.) the same as previous versions?

SDM
Senior Member
Posts: 1644
Joined: Sun Feb 26, 2006 6:24 am
Just the numbers in order: 13492
Location: MI
Contact:

Re: New Zero Loss FX loop Rev 4 - now available, and on sale

Post by SDM » Fri Nov 27, 2015 11:48 am

stormbringer wrote:Are the mounting dimensions (spacing between jacks, etc.) the same as previous versions?
Yes

stormbringer
New Member
Posts: 2
Joined: Wed Aug 27, 2014 10:47 am
Just the numbers in order: 13492

Re: New Zero Loss FX loop Rev 4 - now available, and on sale

Post by stormbringer » Fri Nov 27, 2015 5:06 pm

Nice. I just ordered three... :)

User avatar
Did J
Senior Member
Posts: 165
Joined: Tue Nov 09, 2010 4:23 pm
Just the numbers in order: 13492
Location: Remember Paris

Re: New Zero Loss FX loop Rev 4 - now available, and on sale

Post by Did J » Tue Dec 01, 2015 8:11 am

Thanks to you George and Steve ;^) Just ordered one for my next project :thumbsup:

rmroza
New Member
Posts: 18
Joined: Thu Jun 17, 2010 11:28 am
Just the numbers in order: 7

Re: New Zero Loss FX loop Rev 4 - now available, and on sale!

Post by rmroza » Sat Apr 30, 2016 12:04 am

I recently picked one up and putting in a new build. I want to add a return pot and use it as a "global master".

Is there any changes I need to make to the board and/or what value pot to use?

Thanks in advance.

SDM
Senior Member
Posts: 1644
Joined: Sun Feb 26, 2006 6:24 am
Just the numbers in order: 13492
Location: MI
Contact:

Re: New Zero Loss FX loop Rev 4 - now available, and on sale!

Post by SDM » Sun May 22, 2016 5:53 pm

rmroza wrote:I recently picked one up and putting in a new build. I want to add a return pot and use it as a "global master".

Is there any changes I need to make to the board and/or what value pot to use?

Thanks in advance.
Sorry for late reply, wasn't able to log in here for a while.

For a typical install as you intend in a Marshall-like amp, no board changes needed. Just add (or use existing/re-purposed if available) 1 Meg Audio/Log pot right after/following the loop for your global master.

frankencat
New Member
Posts: 13
Joined: Sat Jan 12, 2013 10:00 pm
Just the numbers in order: 13492

Re: New Zero Loss FX loop Rev 4 - now available, and on sale!

Post by frankencat » Mon May 30, 2016 11:08 pm

Just bought one for my Soldano Astroverb. I had already installed a Mojotone kit but I think the Metro kit sounds better based on past experience. Anybody want a used Mojo kit? :D :D <I kid>
Thanks guys! -Frank

Post Reply