Metropoulos Forum

Can I take a 50 metro kit I get most of the parts from valve storm and follow the instr. of metro's can I put the master vol mod into it and also the one wire mod into both on there own switches so that I can keep it stock or with the mods for that pushed sound

Yes

If you look on the SDM site there should be a switchable 1 wire mod (the RR mod).
To make it sound good in switched mode you have to play with the value of the 150k resistor on the pot and the values of the normal channel cathode cap and resistor values (from 820R/250uF to more like 1.5k/25uF) to stop it flubbling out but still keep the normal channel usable if you want.

When you say MV mod do you mean the Marshall MV with single 1M pot pre-PI or the PPIMV with dual pot (various types)?

What is the web site sdm . I am not sure on the master vol mod I have read here n this form about the non Marshall type mod bow would I figure out what type of master volume I put into my jtm 45 clone I made last year.what one sounds better does one do better with this and the other with that . but a. switable on or off one wire mod would be great when gigging out doing cover songs

What web site do you mean

Odd but the pdf image is visible from my post above on my Mac at home, but not here on my work PC, maybe you cannot see it either. Try this link and go to to misc mods:

https://drive.google.com/folderview?id= ... sp=sharing

yes that one worked now I will figure out what I want to do thanks