Here are some images showing the installation of a Zero Loss Effects Loop in a HiWatt DR103.
https://drive.google.com/file/d/0B5A-Oc ... sp=sharing
https://drive.google.com/file/d/0B5A-Oc ... sp=sharing
https://drive.google.com/file/d/0B5A-Oc ... sp=sharing
https://drive.google.com/file/d/0B5A-Oc ... sp=sharing
https://drive.google.com/file/d/0B5A-Oc ... sp=sharing
https://drive.google.com/file/d/0B5A-Oc ... sp=sharing
https://drive.google.com/file/d/0B5A-Oc ... sp=sharing
https://drive.google.com/file/d/0B5A-Oc ... sp=sharing
Installing a Zero Loss effects Loop in a HiWatt DR103
Moderator: VelvetGeorge
-
- New Member
- Posts: 1
- Joined: Tue Nov 22, 2016 9:29 am
- Just the numbers in order: 13492
- neikeel
- Senior Member
- Posts: 7231
- Joined: Tue Dec 06, 2005 8:31 am
- Location: Suffolk, England
Re: Installing a Zero Loss effects Loop in a HiWatt DR103
Looks like a neat install. I guess that these things are musical instruments and supposed to be played and used for making music, but I would not normally drill holes in the back of a vintage amp if I could help it.
Neil
-
- New Member
- Posts: 1
- Joined: Wed Jan 04, 2017 7:24 am
- Just the numbers in order: 13492
Re: Installing a Zero Loss effects Loop in a HiWatt DR103
Very neatly done!
Where in the circuit did you place this... Looks like your running it straight from the treble pot, right?
I'm also thinking of adding this to a Hiwatt preamp circuit I want to use for recording direct, but am kinda confused because of the extra gain stages between de master and the PI.
Where in the circuit did you place this... Looks like your running it straight from the treble pot, right?
I'm also thinking of adding this to a Hiwatt preamp circuit I want to use for recording direct, but am kinda confused because of the extra gain stages between de master and the PI.