Zero Loss FX loop kit with Mojotone Studio One: Schematic Included

[dlblumberg]

Hi, This is a follow up to my earlier post with schematic included. I'm trying to determine whether the loop will work with this 1 Watt kit from Mojotone. I'm fairly sure I can properly power the loop from the filter caps. My main concern is where to tap the signal and any other issues I should be aware of. I've attached the schematic and placed a red dot at the point I was guessing would be best for the signal tap. Can someone please advise whether I'm on the right track or if this is even possible? Thank you so much.

David