JCM800 1959 question

Everything from original vintage Marshalls to reissues.

Moderator: VelvetGeorge

Post Reply
ipkismx
New Member
Posts: 1
Joined: Mon Nov 20, 2017 7:56 am
Just the numbers in order: 13492

JCM800 1959 question

Post by ipkismx » Mon Nov 20, 2017 8:05 am

Hey, forumsters, I'm new here.
I got a clean 1959 jcm800 not a long time ago. But it seems like it had some mods installed.
Can you please identify the mods on this (please, check out attached pics)?

Also it seems to me that inputs of the channels are messed up. If i plug in 1st channel high the 2nd ch volume doesn't affect anything. But if I plug into 2nd channel high jack I can take all the volume down by lowering the 1st channel volume knob.

I live in a small town. There are no techs that understand tube amps.

Tazin
Senior Member
Posts: 793
Joined: Fri Jan 19, 2007 8:54 pm

Re: JCM800 1959 question

Post by Tazin » Wed Nov 22, 2017 4:16 pm

Unfortunately your attached pictures do not show up...

User avatar
bill bokey
Senior Member
Posts: 490
Joined: Sun Jan 02, 2011 2:54 pm
Just the numbers in order: 13492
Location: France
Contact:

Re: JCM800 1959 question

Post by bill bokey » Thu Nov 23, 2017 4:44 am

It sounds like there's a "one wire" mod, aka Randy Rhoads mod.
But we need to see the pics, maybe try and upload them to imgur.com (or similar site) then post the bbcode here.

Post Reply