Very confused - is the usual way of cascading in a Plexi Bright to Normal or the other way around?

Everything from original vintage Marshalls to reissues.

Moderator: VelvetGeorge

Post Reply
MrRGecko
New Member
Posts: 4
Joined: Sun Dec 17, 2017 5:21 pm
Just the numbers in order: 13492

Very confused - is the usual way of cascading in a Plexi Bright to Normal or the other way around?

Post by MrRGecko » Thu Dec 21, 2017 8:00 am

Getting conflicting opinions on this and reading so many different views on it!

I can't actually figure out what the "correct" or should I say "more usual" way of doing it is, only that the RR Mod ia normal first.

Any input would be great!

danman
Senior Member
Posts: 1099
Joined: Tue Sep 10, 2013 9:09 pm
Just the numbers in order: 13492

Re: Very confused - is the usual way of cascading in a Plexi Bright to Normal or the other way around?

Post by danman » Thu Dec 21, 2017 6:11 pm

I hate to say it but there is no "one way" to do this mod. Everyone hears differently, therefore everyone prefers different versions of this. It has been around for years so there have been many versions created and tested. I have tried a couple and the version in the link below has been my favorite. Keep in mind that the "one wire mod" is different than the standard Marshall 2203/2204 cascaded circuit because it does not employ a cold clipper stage...http://www.marshallforum.com/threads/th ... ain.79602/

Post Reply