I am looking for ideas and suggestions.
Since I have the option on the head,
I'd like to use a Full stack, but what do I use if both head & cabs all have a single jack?
A mono 'Y' cable sounds easy enough, but should I make a breakout box using three cliff's ?
So, out from the amp head to the splitter box then out to the cabs....
How to wire?
Using a second cabinet
Moderator: VelvetGeorge
- JimiJames
- Senior Member
- Posts: 3550
- Joined: Fri Dec 23, 2005 6:32 pm
- Just the numbers in order: 13492
- Location: Chicago
- Contact:
- 54strat
- Senior Member
- Posts: 557
- Joined: Tue Nov 13, 2007 4:30 pm
- Just the numbers in order: 7
- Location: Lubbock, TX
Re: Using a second cabinet
Either way will work. A mono Y-cord, non-shielded of course, everything in parallel. male plug on one end, two males on the other. You could build a a simple box with three female jacks, again, everything wired in parallel.
73 Marshall 1987
76 Marshall 1936 cab w/Celestion V-30's
54 Fender Stratocaster hardtail
87 Fender Stratocaster
76 Marshall 1936 cab w/Celestion V-30's
54 Fender Stratocaster hardtail
87 Fender Stratocaster