Can anyone tell me what should be used for the 4 chassis mounting bolts on an aluminium block end JTM45. This one has some metric bolts and a nut, obviously not original. The round holes in the block seem to be smaller than I would expect and my other amps have cage nuts in square cutouts. Are any washers used ?
A few pics would be helpful.
1967 JTM45 PARTS INFO REQUIRED.
Moderator: VelvetGeorge
-
- New Member
- Posts: 1
- Joined: Thu Aug 11, 2016 4:55 pm
- Just the numbers in order: 13492