How to wire up the bias pot?

Detailed assembly steps separated into threads.

Moderator: VelvetGeorge

Post Reply
BoogieEngineer
Senior Member
Posts: 227
Joined: Sat Jun 30, 2012 1:53 am
Just the numbers in order: 13492
Location: La Jolla, CA

How to wire up the bias pot?

Post by BoogieEngineer » Wed Jul 18, 2012 2:00 am

The bias pot I've got is a horizontal mounted one with 4 legs. From what I've seen on pics, where the 2 legs on top go is clear, but it was hard to see anything going on on the bottom. So,

1. Does each of the bottom 2 legs of the bias pot go to each of the bias caps' ends/terminals?
2. Regardless of the above question, do I need a buss wire connecting the bias caps' terminals?

Thanks!

User avatar
Xplorer
Senior Member
Posts: 2470
Joined: Sun Apr 19, 2009 5:27 pm
Just the numbers in order: 7

Re: How to wire up the bias pot?

Post by Xplorer » Wed Jul 18, 2012 5:46 am

i suppose that amparchives.com and this http://forum.metroamp.com/viewtopic.php?f=26&t=11946" onclick="window.open(this.href);return false;
from billy batz should help in your build. regarding the bias pot, i'm not there yet.

Post Reply