Page 1 of 1
Rocker power switch replacement question
Posted: Wed Feb 28, 2007 8:18 am
by Dave Simpson
Greetings all! Sorry about the stupid question, but I figured I better ask before I tackle this repair.
I have a replacement rocker power switch for my JCM800 2203 and it has four connections. The original switch has five connections. My question is which wire is not needed anymore and what should I do with the wire that's no longer needed?
Any advice would be greatly appreciated!
Posted: Wed Feb 28, 2007 4:42 pm
by 77custom
Posted: Thu Mar 01, 2007 7:14 am
by Dave Simpson
Thanks for the info!
I'm hoping the black wire is the extra one. If not, you probably will never see another post from me.
Posted: Sun Jun 10, 2007 2:53 pm
by Wallace
Posted: Sun Jun 10, 2007 2:54 pm
by Wallace
Posted: Fri Jun 29, 2007 4:20 pm
by jerrydyer
I was going to post Hoffman as well. Had that same dilema a while ago. Dougs cool
Re: Rocker power switch replacement question
Posted: Tue Apr 19, 2011 3:56 am
by neikeel
MODS OVER HERE!
Time to block the Spammer
Re: Rocker power switch replacement question
Posted: Wed Apr 20, 2011 7:50 am
by novosibir
Thanks Neil!
I've kicked the spammer into nirvana forever and have deleted all his (3) posts.
Larry