Larry Grounding using PCB standoffs

Info for maintaining and tweaking your amp to perfection.

Moderator: VelvetGeorge

Post Reply
User avatar
kdmay
Senior Member
Posts: 163
Joined: Sun May 16, 2010 6:17 am
Just the numbers in order: 7
Location: Melbourne, Australia

Larry Grounding using PCB standoffs

Post by kdmay » Fri Jan 19, 2018 7:33 pm

I've successfully used the Larry grounding in many of my DIY builds with great success.

I recently acquired a 1979 JMP Master Volume and it has a fair amount of hum and noise.

I would like to implement the Larry grounding but don't want to drill the chassis given it's original.

Has anyone ever done the Larry grounding using the PCB standoffs as the grounding points using these ground lugs?

Image

Post Reply