Hi all. Haven't been doing much amp repair and modification work for a long time but I'm back.
I have an old 1980s Silver Jubilee head that doesn't get much use. Last power on she didn't want to wake up quickly. The volume seemed to fluctuate for awhile until good and warmed up. I have good reason to believe the tubes are all ok and suspect it might be time to proactively replace some of the key electrolytic caps.
I'm still comfortable doing the soldering work and know how to work on amps (e.g. discharging the filter caps). What I'd like the forum's input on is the following:
1. Should I proactively replace electrolytic caps?
2. If so, which ones?
3. Does the aftermarket offer exact replacements (physical size and value)?
4. Recommendation where to buy?
Any input would be appreciated!
Marshall Silver Jubilee 2550 Electrolytic Filter Caps
Moderator: VelvetGeorge
- JD
- Senior Member
- Posts: 989
- Joined: Wed Jan 04, 2006 2:00 pm
-
- New Member
- Posts: 41
- Joined: Thu Jun 03, 2010 3:39 am
- Just the numbers in order: 7
Re: Marshall Silver Jubilee 2550 Electrolytic Filter Caps
I changed the old 3 capacitors with ARS
- neikeel
- Senior Member
- Posts: 7231
- Joined: Tue Dec 06, 2005 8:31 am
- Location: Suffolk, England
Re: Marshall Silver Jubilee 2550 Electrolytic Filter Caps
Nothing wrong with ARS or F&T caps
Three 50uF/50uF cans on the 50w I believe.
IIRC the ARS are ever so slightly skinnier than the originals so might need a wrap of tape around them for the cap mounting brackets to hold them tightly enough.
Three 50uF/50uF cans on the 50w I believe.
IIRC the ARS are ever so slightly skinnier than the originals so might need a wrap of tape around them for the cap mounting brackets to hold them tightly enough.
Neil
- JD
- Senior Member
- Posts: 989
- Joined: Wed Jan 04, 2006 2:00 pm
Re: Marshall Silver Jubilee 2550 Electrolytic Filter Caps
Thanks. F&T seems to be popular around the interweb.
What about the two larger 160V 10uF caps?
What about the two larger 160V 10uF caps?