I just installed the FX loop in my JTM45 clone. This is the one from StewMac (Mojotone)? Anyway, I have to run it on the +4 setting because the noise on the -20 setting is too much. I typically don't use the standby switch when turning on and off the amp but when I turn it off, it makes a terrible crackling sound if anything is plugged in the loop. Is this normal?
Thanks
Warren
Zero Loss Loop noise
Moderator: VelvetGeorge
-
- New Member
- Posts: 1
- Joined: Fri Oct 29, 2021 7:40 am
- Just the numbers in order: 13492