Tips on How to Pull SLP Board
Moderator: VelvetGeorge
-
bobtec
- Senior Member
- Posts: 469
- Joined: Mon May 02, 2005 4:38 pm
- Just the numbers in order: 13492
- Location: Dana Point,ca
Tips on How to Pull SLP Board
I finally got the parts and feel brave enough to do a few small part changes,Just upgrade some of the caps and one resistor...And tips on how would be of help,like do I have to unsolder the 50-50uf electro cap above the board...I just want to be able to unsolder a few caps and put "better" ones in...I am going to go slow and just replace the bright caps first..see how it sound,then the MKT .68 caps and the .022uf caps....My biggest fear is burning a trase