Which of these two resistors would you rather use for the 1K, 5W resistor on the power tube screens? Or would either work? One is cemented and specifically says non-flammable. The other is silicone-ceramic and doesn't specify. I have both on hand.
http://www.ohmite.com/cat/res_40.pdf
http://www.mouser.com/ds/2/427/acac-at-222859.pdf
Which One for Screen Grid?
Moderator: VelvetGeorge
-
- Senior Member
- Posts: 359
- Joined: Mon Jul 12, 2010 10:38 am
- Just the numbers in order: 7