2203 Build questions

guitarplayer83 · Post by **guitarplayer83** » Thu Feb 10, 2011 5:10 pm

Ok I am getting ready to build a 2203. I plan to order the chassis and faceplates from Ceriatone unless there are other options. My question is what size board do i need for the turret board, length, width, thickness? This build will be a jcm800 2203. Thanks.

demonufo · Post by **demonufo** » Thu Feb 10, 2011 7:51 pm

All depends on which layout you're following and whether or not the pre-amp filter cap is to be on the board, or on the chassis.

guitarplayer83 · Post by **guitarplayer83** » Thu Feb 10, 2011 8:14 pm

I plan on using the lay out in the mv 100 watt instructions that I downloaded from here. Thanks

axeman · Post by **axeman** » Fri Feb 11, 2011 12:43 am

Buy the chassis and the board from Nik at Ceriatone, make sure he includes the stand offs and cage nuts. If you don't what to use the Ceriatone board I can sale you mine slightly used.

rockstah · Post by **rockstah** » Fri Feb 11, 2011 8:21 am

guitarplayer83 wrote:Ok I am getting ready to build a 2203. I plan to order the chassis and faceplates from Ceriatone unless there are other options. My question is what size board do i need for the turret board, length, width, thickness? This build will be a jcm800 2203. Thanks.

Nik's board will work perfectly for a 2203 spec.
Mark

guitarplayer83 · Post by **guitarplayer83** » Fri Feb 11, 2011 10:58 am

Thanks for the replys. I am trying to keep shipping down ordering from Ceriatone so thats why I was just going to order the chassis and faceplates. I am going to build an AX84 high octain too, I figured I would order the blank board from watts for the 2203 when i order the high octain stuff. Thats why I wanted to know the size of the 2203 board.

[quote="axeman"]Buy the chassis and the board from Nik at Ceriatone, make sure he includes the stand offs and cage nuts. If you don't what to use the Ceriatone board I can sale you mine slightly used.[/quote
How much for the board, and any mods, what type of caps and stuff were used. Thanks

axeman · Post by **axeman** » Fri Feb 11, 2011 11:17 am

The board is blank with turrets, but if you want I can populated and add the lead wires? I can install Mallory 150, Orange drop,IC, Sozo, and Metall film capacitors with CF or CC resistors and 20g stranded or 22g top coat wire. BTW I have 2203 board from Nik if you needed.

guitarplayer83 · Post by **guitarplayer83** » Fri Feb 11, 2011 11:31 am

I can populate the board, how much for it. thanks

axeman · Post by **axeman** » Fri Feb 11, 2011 11:57 am

metro style or Ceriatone 20 bucks

guitarplayer83 · Post by **guitarplayer83** » Fri Feb 11, 2011 2:38 pm

axeman wrote:metro style or Ceriatone 20 bucks

Metro Style, 20 sounds good p.m. the details and we can work the transaction out. Thanks

Metropoulos Forum

2203 Build questions

2203 Build questions

Re: 2203 Build questions

Re: 2203 Build questions

Re: 2203 Build questions

Re: 2203 Build questions

Re: 2203 Build questions

Re: 2203 Build questions

Re: 2203 Build questions

Re: 2203 Build questions

Re: 2203 Build questions