Need Suggestions for a Vintage Look PTP Board

ChuckLogan · Post by **ChuckLogan** » Mon Mar 05, 2007 2:49 pm

I am planning to eventually replace the PTP board in my JMP 50 (split cath) and need some suggestions.

I want to use a Vintage looking perforated board, and multi-level split turrets . .

But I am unclear on the following:

Which perforated board I should get red/brown and the exact type.
Should I wire cross turret connects under or above.
Should I wire primary wire connections above of under the board.

Also any advice for soucing would be great, I have heard George will do custom boards ?

Thanks
Chuck

ChuckLogan · Post by **ChuckLogan** » Thu Mar 08, 2007 5:13 pm

Got my answer . .

Thanks
Chuck

leleduke · Post by **leleduke** » Thu Nov 22, 2007 11:45 am

My question also...

bluze81 · Post by **bluze81** » Thu Nov 22, 2007 2:24 pm

Ray Domalski makes great boards with split turrets and perferrated,look identical to the orig,[IMO] very high quality,reach him thru the Marstran website, as you know many examples pictures of 1960s Marshalls on the site,great reference for building clones, bluze81

Wicksy · Post by **Wicksy** » Thu Nov 22, 2007 5:41 pm

bluze81 wrote:Ray Domalski makes great boards with split turrets and perferrated,look identical to the orig,[IMO] very high quality,reach him thru the Marstran website, as you know many examples pictures of 1960s Marshalls on the site,great reference for building clones, bluze81

Yup, Ray's stuff is top notch. He uses the RS type spilt turrets and perforated red swirl like the stuff George now uses. I have a JTM 45 board, a 5F1 champ board, a JTM100 board and a set of Hiwatt boards coming from him.

straycat · Post by **straycat** » Fri Nov 23, 2007 6:05 pm

I have a perforated bare board for my 50 Watt Plexi build on order from Ray. Being built to the same layout as George's 50 watt Plexi kit board. Wicksy when did you order your boards?

Wicksy · Post by **Wicksy** » Sat Nov 24, 2007 9:45 am

I got his e-mail address from Brian Wallace's site and went from there.

Oops...sorry, you said when, not where...

Rays been pretty busy lately and has been trying to rectify some QC issues with turrets, which has prolonged the turn over time. It'll come soon enough and is certainly worth the wait.

straycat · Post by **straycat** » Sat Nov 24, 2007 10:26 am

He just emailed me and said he was going to ship out. He mentioned the problems that he has been going through with the turrets. It all works out. I ordered the rest of the parts for my build on Wednesday and do not expect them till the end of next week.

Wicksy · Post by **Wicksy** » Mon Nov 26, 2007 8:37 am

Excellent...that menas my Hiwatt boards should be coming soon aswell

908ssp · Post by **908ssp** » Mon Nov 26, 2007 11:05 am

Here is a 18 watt board from Ray I populated myself and a 45 watt board that he did for my BB conversion that Brian and Ray both worked on.

Wicksy · Post by **Wicksy** » Tue Nov 27, 2007 5:30 pm

Nice

I really like the 18 watt board.

straycat · Post by **straycat** » Fri Nov 30, 2007 6:24 pm

Received my board from Ray Domzalski yesterday for my Plexi 50watt build. This board is a flawless work of art. There is not a single splinter in any of the drilled holes. It has vintage split turrets and was done to match the layout that George uses in his Plexi 50watt kits . Ray is a nice guy and does outstanding work!! Here is a picture of the board

http://s27.photobucket.com/albums/c166/ ... t%20Board/

Ray's Site

http://smallbox.freeservers.com/catalog.html

Wicksy · Post by **Wicksy** » Sun Dec 02, 2007 10:49 am

Nice! I love those perforated boards he does