Metropoulos Forum

Looking for part # of split turrets for project.

Look on the Keystone website. They have a catalogue page with all the turrets they make. you then have to find a place that stocks them, the keystone site will help with this too.

Thanks Joey.

What is wrong with these

http://metroamp.com/store/index.php?mai ... cts_id=282

I use these since my big bag of NOS RS one sran out.

neikeel wrote:What is wrong with these

http://metroamp.com/store/index.php?mai ... cts_id=282

I use these since my big bag of NOS RS one sran out.

Those are good to, I live near Anahiem were I can drive over and pick them up.


Thanks

neikeel wrote:
I use these since my big bag of NOS RS one sran out.

I bet those NOS turrets sound killer.

axeman wrote:

neikeel wrote:What is wrong with these

http://metroamp.com/store/index.php?mai ... cts_id=282

I use these since my big bag of NOS RS one sran out.

Those are good to, I live near Anahiem were I can drive over and pick them up.


Thanks

I believe Metro is located in Michigan so not sure you can just drive over there from Anaheim.

Structo wrote:

axeman wrote:

neikeel wrote:What is wrong with these

http://metroamp.com/store/index.php?mai ... cts_id=282

I use these since my big bag of NOS RS one sran out.

Those are good to, I live near Anahiem were I can drive over and pick them up.


Thanks

I believe Metro is located in Michigan so not sure you can just drive over there from Anaheim.

LOL I remember a time when I lived out there and I DID just drive over there 1/2 the time.

Structo wrote:

axeman wrote:

neikeel wrote:What is wrong with these

http://metroamp.com/store/index.php?mai ... cts_id=282

I use these since my big bag of NOS RS one sran out.

Those are good to, I live near Anahiem were I can drive over and pick them up.


Thanks

I believe Metro is located in Michigan so not sure you can just drive over there from Anaheim.

flemingmras wrote:

neikeel wrote:
I use these since my big bag of NOS RS one sran out.

I bet those NOS turrets sound killer.

The good thing about them was that they actually fitted the turret boards snugly, came with the correct staking tools and were pretinned so soldered really well

The split turrets at Turretboards.com are pre-tinned.

Hey guys,
I picked up a metro 2203 ptp board and I need about (6) turrets to add a couple parts to the board. I tried pressing out one of the unused ones from the right end by the diodes but ended up wrecking it in the process. I actually could get by with (2) but could use a few spares too. I could go with the standard turrets that Metro used on these boards or split turrets.

I would also need to know where to get the correct size drill bit and what that size is.
If anyone has a few to spare or could tell me where to get a few, please send me a PM. I don't need to buy a whole bag, just a few. Thanks!