Who needs faceplates/backplates?

Sparky · Post by **Sparky** » Sun Jul 24, 2011 9:27 pm

I finished up some JMP and JTM45 front panels today. I think I pinged everybody who was waiting. If I missed you, please PM me. Sorry it's been so slow.

gtr-fxr · Post by **gtr-fxr** » Wed Aug 10, 2011 1:14 pm

is anyone doing 2203 style faceplates?

neikeel · Post by **neikeel** » Fri Aug 12, 2011 1:50 pm

Sparky had some (I had two

)

Sparky · Post by **Sparky** » Sat Aug 13, 2011 6:43 am

Hey Neil,
I should clarify, those are the old style , pre-JCM800 . Also those were prototypes so I only made those two (actually, I made several but the yield was poor using that method). I have the artwork and could have them printed in the next batch, if there were enough demand. I've never had anybody ask me for those, although perhaps they did and I assumed they wanted JCM800

neikeel · Post by **neikeel** » Sat Aug 13, 2011 8:55 am

I was very pleased with the results of these. Yes they are early 2203/4 plexi to suit toggle switches these are the ones with two inputs, gain and MV, usual tone and presence pots, nice simple understated without the extra grouping markings that Marshall used on the rocker switch types

Cheech · Post by **Cheech** » Sun Aug 14, 2011 1:31 am

I might be needing a set of the MK II JTM45 front/MK III Super 100 Amplifier white back for a JTM45/100 chassis that Brian has for sale. Brian is getting me a quote on shipping right now for the chassis. I am getting the IEC chassis.

Thanks
Will

Roe · Post by **Roe** » Sun Aug 14, 2011 8:22 am

any progress on the backplates Sparky?

Sparky · Post by **Sparky** » Sun Aug 14, 2011 9:03 am

Yes, Steve Marshall and I are working on them. Should know more in a couple weeks.

Roe · Post by **Roe** » Sun Aug 14, 2011 10:23 am

great!

S.Marshall · Post by **S.Marshall** » Sun Aug 14, 2011 11:27 am

Cheech wrote:I might be needing a set of the MK II JTM45 front/MK III Super 100 Amplifier white back for a JTM45/100 chassis that Brian has for sale. Brian is getting me a quote on shipping right now for the chassis. I am getting the IEC chassis.

Thanks
Will

We'll have those available too with the correct gold lettering on the rear. you'll just need to make sure his chassis has the same rear layout as my block ends.

thorgir666 · Post by **thorgir666** » Sun Oct 16, 2011 2:41 pm

If there still is a possibility for a set of face/backplates that would fit Brian W's upcoming 50w chassis I would like to sign up for a set.

shakti · Post by **shakti** » Mon Oct 17, 2011 1:55 pm

I will also be needing a rear faceplate for a 50W.

prutser · Post by **prutser** » Thu Nov 03, 2011 5:29 pm

I also need a set of face/backplates that would fit Brian W's upcoming 50w chassis I would like to sign up for a set. I need plates for a jtm50 black flag.

Twistingcrow · Post by **Twistingcrow** » Sat Nov 26, 2011 5:24 pm

Sparky told me that the faceplates and rearplates for Brian's 50W chassis would be ready in December... I'm in for a full set as well!

jpmucka · Post by **jpmucka** » Fri Dec 02, 2011 9:27 pm

I just ordered a 50W Style 1 from Brian. I would like to get a front and back plate for a JTM50 Black Flag as well when Sparky does them.

Metropoulos Forum

Who needs faceplates/backplates?

Re: Who needs faceplates/backplates?

Re: Who needs faceplates/backplates?

Re: Who needs faceplates/backplates?

Re: Who needs faceplates/backplates?

Re: Who needs faceplates/backplates?

Re: Who needs faceplates/backplates?

Re: Who needs faceplates/backplates?

Re: Who needs faceplates/backplates?

Re: Who needs faceplates/backplates?

Re: Who needs faceplates/backplates?

Re: Who needs faceplates/backplates?

Re: Who needs faceplates/backplates?

Re: Who needs faceplates/backplates?

Re: Who needs faceplates/backplates?

Re: Who needs faceplates/backplates?