Metroamp JCM800 2203 Kit for sale , More Info!!!
Moderator: VelvetGeorge
- VelvetGeorge
- Site Owner
- Posts: 7233
- Joined: Tue Oct 14, 2003 5:12 pm
- Just the numbers in order: 13492
- Location: The Murder Mitten
- Contact:
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
Here's a quick shot.
G
G
- Attachments
-
- chassis top 1 copy.jpg
- (92.99 KiB) Downloaded 2698 times
-
- Senior Member
- Posts: 620
- Joined: Mon Mar 13, 2006 4:25 pm
- Just the numbers in order: 7
- Location: Los Angeles & London
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
You're raising the bar, George! Great work.
-
- Senior Member
- Posts: 86
- Joined: Tue Sep 09, 2008 9:33 pm
- Just the numbers in order: 7
- Location: Los Angeles, CA
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
Hmmm... Looks freakin' fantastic! But that later JMP style headbox looks a tad awkward without the script logo on it. This may have been covered before, but is there anyway or anyone that would be willing to make a "MetroAmp" Marshall script style emblem for these amps? I think that would just complete the look. In fact... I think all the other amp kits could use one of those white script logos. I know the block logos are available but it would just be 10 times more badass if there was a white MetroAmp script emblem on all of these amps. My opinion.VelvetGeorge wrote:Here's a few more shots.
"Seldom give unguarded advice, for advice is a dangerous gift, even from the wise to the wise, and all courses may run ill."
-
- New Member
- Posts: 5
- Joined: Mon Apr 13, 2009 4:53 pm
- Just the numbers in order: 7
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
Hi guys,
I've recently been able to try my friends 2203 which is dated to 1984. Does anyone know what revision of the 2203 circuit would have been in use at this time and how the circuit in this kit differs. Furthermore, would this chassis fit a later style JCM800 head cabinet?
Thanks, Sam
I've recently been able to try my friends 2203 which is dated to 1984. Does anyone know what revision of the 2203 circuit would have been in use at this time and how the circuit in this kit differs. Furthermore, would this chassis fit a later style JCM800 head cabinet?
Thanks, Sam
- VelvetGeorge
- Site Owner
- Posts: 7233
- Joined: Tue Oct 14, 2003 5:12 pm
- Just the numbers in order: 13492
- Location: The Murder Mitten
- Contact:
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
Agree 100% on the logo Adam. I held a gold block logo up to the cab and it was immediately clear that it didn't work. We're working on a large, white script Metroamp logo. But I don't know if it will be ready for th May 25th shipping date. If not, anyone who ordered a kit will get one when they come in.
Tux, this chassis should fit a JCM 800 box just fine. But I can't guaranty the mounting holes will line up.
george
Tux, this chassis should fit a JCM 800 box just fine. But I can't guaranty the mounting holes will line up.
george
-
- Senior Member
- Posts: 96
- Joined: Mon Jan 19, 2009 3:26 pm
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
Sounds like a great kit choice. I think it just usurped an 18 watt as my project for next winter.
Questions though...........Will Metro offer it in custom colours? Is this a different circuit than the JCM800 models? I believe Canadian models were made with toggles instead of the rocker switches. Will that be available?
Unfortunately there is some downside for me as the Canadian dollar is not so good right now vs US dollars. You can still pick up a used JCM800 for $1,000 - $1300 Canadian. But there is still the upside of building your own "quality handbuilt" amp. Price isn't everything that's for sure.
Questions though...........Will Metro offer it in custom colours? Is this a different circuit than the JCM800 models? I believe Canadian models were made with toggles instead of the rocker switches. Will that be available?
Unfortunately there is some downside for me as the Canadian dollar is not so good right now vs US dollars. You can still pick up a used JCM800 for $1,000 - $1300 Canadian. But there is still the upside of building your own "quality handbuilt" amp. Price isn't everything that's for sure.
- VelvetGeorge
- Site Owner
- Posts: 7233
- Joined: Tue Oct 14, 2003 5:12 pm
- Just the numbers in order: 13492
- Location: The Murder Mitten
- Contact:
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
Thanks!
I can do custom colors for these, but not for the initial roll out. Let me get started shipping them out the door and I'll look into it.
No toggle switch version, sorry.
The circuit is the same as early JCM800 2203's, save for one cap. A 10pf on V1, which was added circa '80 or '81.
VG
I can do custom colors for these, but not for the initial roll out. Let me get started shipping them out the door and I'll look into it.
No toggle switch version, sorry.
The circuit is the same as early JCM800 2203's, save for one cap. A 10pf on V1, which was added circa '80 or '81.
VG
- Flames1950
- Senior Member
- Posts: 9294
- Joined: Sun Feb 08, 2004 1:04 am
- Location: Waukee, Iowa
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
A 100pF added in the early eighties.........and how does the chassis fit into a JCM800 box with the mounting tabs on the ends instead of folded back under the chassis?
Sorry, just keeping you honest O Velvet One.........
Sorry, just keeping you honest O Velvet One.........
- VelvetGeorge
- Site Owner
- Posts: 7233
- Joined: Tue Oct 14, 2003 5:12 pm
- Just the numbers in order: 13492
- Location: The Murder Mitten
- Contact:
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
Thanks Flames, I needed another "0" there.
I seem to recall the mounting centers were pretty close, even though the chassis are different. I don't have one here right now to check. Anyone have an 800 to take some measurements.
VG
I seem to recall the mounting centers were pretty close, even though the chassis are different. I don't have one here right now to check. Anyone have an 800 to take some measurements.
VG
- novosibir
- Senior Member
- Posts: 4654
- Joined: Tue Nov 22, 2005 2:32 pm
- Just the numbers in order: 7
- Location: Nuernberg, Germany
- Contact:
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
I don't have any here at the moment, but I know that the mounting centers are the same at both chassis variants.VelvetGeorge wrote:I seem to recall the mounting centers were pretty close, even though the chassis are different. I don't have one here right now to check. Anyone have an 800 to take some measurements.
Larry
The fault almost always is sitting in front of the amp
Larry's Website now with included Pix's Gallery
Larry's Website now with included Pix's Gallery
-
- Senior Member
- Posts: 1644
- Joined: Sun Feb 26, 2006 6:24 am
- Just the numbers in order: 13492
- Location: MI
- Contact:
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
Edit: nevermind, Larry answered it.
-
- Senior Member
- Posts: 481
- Joined: Sun Oct 21, 2007 1:39 pm
- Contact:
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
Have you posted a version of the instructions yet? BTW, it looks fantastic George, great work
Late 70's EVH tone or bust
- VelvetGeorge
- Site Owner
- Posts: 7233
- Joined: Tue Oct 14, 2003 5:12 pm
- Just the numbers in order: 13492
- Location: The Murder Mitten
- Contact:
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
Thanks! No instructions posted yet, I'm still writing them.
it's taking much longer this time because I stop after each task to make sure the pictures, diagrams and text are clear and make sense. And for me, that means a lot of editing. Ha ha!
VG
it's taking much longer this time because I stop after each task to make sure the pictures, diagrams and text are clear and make sense. And for me, that means a lot of editing. Ha ha!
VG
-
- Senior Member
- Posts: 237
- Joined: Wed Sep 05, 2007 11:44 am
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
Good job George on the amp, it looks great. Is there anyway though that you can change the faceplate on it so that it doesnt say Metro on it...for authenticity sake?
-
- Senior Member
- Posts: 250
- Joined: Wed Oct 08, 2008 11:01 am
- Just the numbers in order: 7
- Location: Brumunddal, Norway
Re: inre: the METROAMP; JCM800 2203 Kit for sale , More Info!!!
slashsound, come on! what are you really expecting? Cant you just be happy George is making these kits for us?
If you need an amp THAT authentic, why not go to ebay and buy an original??
If you need an amp THAT authentic, why not go to ebay and buy an original??
Metroamp builds : 68` 50w (x2), 69` 100w, 68` 100w 12xxx (x3), JTM45/100, JTM50(x2), 2203