The only difference I can tell between the Lead and 70's Lead is the Lead has the 33uf cap replaced with a 50uf cap and the 47K ohm resistor swapped out with a 100K ohm.
Can anyone tell me what this change achieves?
50W lead vs. 70's spec.
Moderator: VelvetGeorge
-
- New Member
- Posts: 4
- Joined: Thu Mar 31, 2011 10:18 am
- Just the numbers in order: 7
-
- Senior Member
- Posts: 1407
- Joined: Fri Mar 12, 2010 9:05 pm
- Just the numbers in order: 7
Re: 50W lead vs. 70's spec.
[youtube]http://www.youtube.com/watch?v=ERiqx8l44Gw[/youtube]
-
- Senior Member
- Posts: 5054
- Joined: Thu Apr 13, 2006 1:36 pm
- Just the numbers in order: 7
- Location: Drontheim. Norwegen
- Contact:
Re: 50W lead vs. 70's spec.
the 70s amps, esp those with 100k nfb, doesn't normally have a .68uf on v2a.tqlspec wrote:The only difference I can tell between the Lead and 70's Lead is the Lead has the 33uf cap replaced with a 50uf cap and the 47K ohm resistor swapped out with a 100K ohm.
Can anyone tell me what this change achieves?
decreasing nfb gives more rawness, adding preamp filtering gives stiffness, the .68 gives a mid and treble boost
http://www.myspace.com/20bonesband" onclick="window.open(this.href);return false;
http://www.myspace.com/prostitutes" onclick="window.open(this.href);return false;
Super 100 amps: 1202-119 & 1202-84
JTM45 RS OT JTM50 JMP50 1959/2203/34/39
http://www.myspace.com/prostitutes" onclick="window.open(this.href);return false;
Super 100 amps: 1202-119 & 1202-84
JTM45 RS OT JTM50 JMP50 1959/2203/34/39