Dagnall t3556 any info???
Moderator: VelvetGeorge
-
- Senior Member
- Posts: 209
- Joined: Fri Aug 23, 2013 1:26 pm
- Just the numbers in order: 13492
Dagnall t3556 any info???
Can't find anything about these pts. Anybody know when they were used? My 74 has one.
-
- Senior Member
- Posts: 72
- Joined: Mon Dec 04, 2006 7:49 pm
- Just the numbers in order: 7
- Location: Austin, TX
Re: Dagnall t3556 any info???
Joshabr1 wrote:Can't find anything about these pts. Anybody know when they were used? My 74 has one.
Never seen a T3556. There was a T3560 that was used in Canadian-market 50W Marshalls.
-
- Senior Member
- Posts: 209
- Joined: Fri Aug 23, 2013 1:26 pm
- Just the numbers in order: 13492
Re: Dagnall t3556 any info???
Well it exists. My amp has it. And another member here goes by maxwedge has a amp close to mine in date that has the 3556 as well.
- Brian Wallace
- Supporting Advertiser
- Posts: 873
- Joined: Thu Mar 03, 2005 10:45 pm
- Just the numbers in order: 7
- Location: Michigan
- Contact:
Re: Dagnall t3556 any info???
I don't have any info on this PT as of yet. If you are willing to take some voltage readings and email them to me I at least start a file on it.
-
- Senior Member
- Posts: 209
- Joined: Fri Aug 23, 2013 1:26 pm
- Just the numbers in order: 13492
Re: Dagnall t3556 any info???
Brian have u uncovered anything on these?
-
- Senior Member
- Posts: 128
- Joined: Wed May 25, 2005 4:34 pm
- Just the numbers in order: 13492
- Location: T-Ville CT
Re: Dagnall t3556 any info???
Resurrecting this thread, I have a 1970 metal panel sporting a T3556 & want to know if anyone else has taken some voltage measurements ?
The one I have 348vac secondary & heaters are at 6.0vac.
also posted at Marstran
http://forum.marstran.com/viewtopic.php?f=20&t=608
Thanks,
David
The one I have 348vac secondary & heaters are at 6.0vac.
also posted at Marstran
http://forum.marstran.com/viewtopic.php?f=20&t=608
Thanks,
David
?