Hi All,
I have completed a build of jump 50 watt, lead spec. Everything seems to be all right, however there is one thing that is not clear to me.
I measure voltages and all of them are in line with the voltage chart in the kit instructions, except for voltages on V3.
Chart shows that
V3 pin 1 = 208V and V3 pin 6 = 200V.
I measure
V3 pin 1 = 176V and V3 pin 6 = 170V
What could cause this discrepancy?
Thanks,
Alex.
JMP 50W V3 Voltages
Moderator: VelvetGeorge
-
- New Member
- Posts: 15
- Joined: Wed Jun 17, 2015 12:56 pm
- Just the numbers in order: 13492
-
- New Member
- Posts: 15
- Joined: Wed Jun 17, 2015 12:56 pm
- Just the numbers in order: 13492
Re: JMP 50W V3 Voltages
It was bad tube. Changed to a different one and everything was back to normal.