The Tone...Have I done it? [CLIP]
Moderators: VelvetGeorge, RACKSYSTEMS
-
- New Member
- Posts: 14
- Joined: Sun Aug 03, 2014 11:34 pm
- Just the numbers in order: 13492
The Tone...Have I done it? [CLIP]
RWTD, not skill demo just tone
alder body, maple neck through duncan 78'
https://soundcloud.com/sc_user5150/runn ... -van-halen
alder body, maple neck through duncan 78'
https://soundcloud.com/sc_user5150/runn ... -van-halen
- Strat78
- Senior Member
- Posts: 3093
- Joined: Fri Aug 03, 2007 12:38 pm
- Just the numbers in order: 13492
- Location: though I'm standing still, I'm in a moving place.
Re: The Tone...Have I done it? [CLIP]
Yes to the tone and playing. You forgot to mention what amp you are using. Spooky good clips, especially DTNA.
-
- Senior Member
- Posts: 793
- Joined: Fri Jan 19, 2007 8:54 pm
Re: The Tone...Have I done it? [CLIP]
The clips do have the majority of the "sonic elements" that make up Ed's old tone. As 'Strat78' pointed out, it would be nice to know about the amp and the rest of the rig used to create the clips.
-
- New Member
- Posts: 14
- Joined: Sun Aug 03, 2014 11:34 pm
- Just the numbers in order: 13492
Re: The Tone...Have I done it? [CLIP]
Having read thousands of posts on this forum, you guys would kill me for having this rig. Im looking into getting a Friedman be-100, Marshall jcm200 dsl, or build my own 12xxx from spec ...It is a peavey vypr vip-2 running pure clean into a laptop--->then into Cockos Reaper where then i use and array of plugins, impulse responses and eq'ing to get the tone i want----> out to 2 Jbl studio speakers for sound.
I will end up posting straight raw clips soon to showcase how close it actually gets to the real thing, but half of it is in the hands as I try to get as close as I can to that too
Also after my post made it through my ip got blocked by the firewall and dont know why, if an admin can help me
I will end up posting straight raw clips soon to showcase how close it actually gets to the real thing, but half of it is in the hands as I try to get as close as I can to that too
Also after my post made it through my ip got blocked by the firewall and dont know why, if an admin can help me
-
- New Member
- Posts: 14
- Joined: Sun Aug 03, 2014 11:34 pm
- Just the numbers in order: 13492
Re: The Tone...Have I done it? [CLIP]
TheEVHToneChaser wrote:It is a peavey vypr vip-2 running pure clean into a laptop--->then into Cockos Reaper where then i use and array of plugins, impulse responses and eq'ing to get the tone i want
Ive spent Hundreds of hours on getting a base plexi sound through here, and use eq and such to get me to the rest
(I also study the isolated tracks, as that is where i learn how to play most of these songs, and use the forum and tutorials for the fast licks that ed does)
-
- Senior Member
- Posts: 164
- Joined: Wed Aug 20, 2014 6:04 am
- Just the numbers in order: 13492
- Location: Land of The Rising Sun
Re: The Tone...Have I done it? [CLIP]
Dude those clips blow my mind. If I didn't know any better I would say those were the isolated tracks. Totally awesome man. Wish you would have busted out the RWTD solo. Tone and playing spot on.
-
- New Member
- Posts: 14
- Joined: Sun Aug 03, 2014 11:34 pm
- Just the numbers in order: 13492
Re: The Tone...Have I done it? [CLIP]
Thanks manLbrown3743 wrote:Dude those clips blow my mind. If I didn't know any better I would say those were the isolated tracks. Totally awesome man. Wish you would have busted out the RWTD solo. Tone and playing spot on.
Im doing an Aint talkin bout love one soon maybe later today
this should blow peoples minds around here i just have to record
- Strat78
- Senior Member
- Posts: 3093
- Joined: Fri Aug 03, 2007 12:38 pm
- Just the numbers in order: 13492
- Location: though I'm standing still, I'm in a moving place.
Re: The Tone...Have I done it? [CLIP]
Apply that good ear and talent to a 12 series build, that would be something to behold! Thanks for posting your work so far, it's very refreshing.
-
- Senior Member
- Posts: 793
- Joined: Fri Jan 19, 2007 8:54 pm
Re: The Tone...Have I done it? [CLIP]
The clips really do sound good. When I listened to RWTD I had a gut feeling that the tone my have been constructed along the lines of what you actually did since I didn't hear any miscellaneous noises (i.e. finger string noise, amp hiss, etc.,) associated with a loud tube amp. But I have to admit your ears really deciphered the nuances of Ed's old tone nicely.
-
- New Member
- Posts: 14
- Joined: Sun Aug 03, 2014 11:34 pm
- Just the numbers in order: 13492
Re: The Tone...Have I done it? [CLIP]
I try to eliminate string noise in my playing as it is slightly annoyingTazin wrote:The clips really do sound good. When I listened to RWTD I had a gut feeling that the tone my have been constructed along the lines of what you actually did since I didn't hear any miscellaneous noises (i.e. finger string noise, amp hiss, etc.,) associated with a loud tube amp.
My strings were dead on those clips and I have a noise gate setup so i dont get any background hiss
Ill put a clip up here later that will blow those other two away
Thank you
This forum needed a little rejuvination
- garbeaj
- Senior Member
- Posts: 3020
- Joined: Mon Dec 27, 2010 12:58 pm
- Just the numbers in order: 13492
- Location: Houston, TX
Re: The Tone...Have I done it? [CLIP]
Excellent. Honestly only Strat78 is in the same league. Impressive...most impressive!
Strat78 had achieved incredible results years ago with a Pod. This is a great virtual simulation along those same lines. Really cool!
Strat78 had achieved incredible results years ago with a Pod. This is a great virtual simulation along those same lines. Really cool!
-
- New Member
- Posts: 14
- Joined: Sun Aug 03, 2014 11:34 pm
- Just the numbers in order: 13492
Re: The Tone...Have I done it? [CLIP]
Thank you very much Ive heard those clips before and was surprised by that.garbeaj wrote:Excellent. Honestly only Strat78 is in the same league. Impressive...most impressive!
Strat78 had achieved incredible results years ago with a Pod. This is a great virtual simulation along those same lines. Really cool!
This is a new one... https://soundcloud.com/sc_user5150/atbl-tone This may be a better example of the capability with my current setup.
I didnt have all of the fills, extra licks and such, it is just kinda thrown together it is mostly dry compared to the RWTD clip
- FL6
- Senior Member
- Posts: 428
- Joined: Tue Apr 05, 2005 11:25 pm
Re: The Tone...Have I done it? [CLIP]
For ATBL intro, how did you get the C-B-C flange effect, or what flange and settings? This part has always alluded me. Yours was dead-on. Thanks for the clips.TheEVHToneChaser wrote:Thank you very much Ive heard those clips before and was surprised by that.garbeaj wrote:Excellent. Honestly only Strat78 is in the same league. Impressive...most impressive!
Strat78 had achieved incredible results years ago with a Pod. This is a great virtual simulation along those same lines. Really cool!
This is a new one... https://soundcloud.com/sc_user5150/atbl-tone This may be a better example of the capability with my current setup.
I didnt have all of the fills, extra licks and such, it is just kinda thrown together it is mostly dry compared to the RWTD clip
-
- Senior Member
- Posts: 793
- Joined: Fri Jan 19, 2007 8:54 pm
Re: The Tone...Have I done it? [CLIP]
I agree that the flanger parts sound really good. So, how different is the recipe for the basic guitar sound between the RWTD and ATBL tracks?
-
- New Member
- Posts: 14
- Joined: Sun Aug 03, 2014 11:34 pm
- Just the numbers in order: 13492
Re: The Tone...Have I done it? [CLIP]
For the flanger its an Mxr Flanger like ed's, and in an interview ed said that he had the first 3 knobs set at somewhere between 11 and 11:30,and for the regen it would be all the way dialed but for me its too swooshy so i keep it at 4 o clockFL6 wrote:For ATBL intro, how did you get the C-B-C flange effect, or what flange and settings? This part has always alluded me. Yours was dead-on. Thanks for the clips.